Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials IV (Ceramic Engineering and Science Proceedings v. 31,

Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials IV (Ceramic Engineering and Science Proceedings v. 31,

By: Sanjay Mathur (author), ACerS (American Ceramic Society) (author), Tatsuki Ohji (editor), Mrityunjay Singh (editor)Hardback

1 - 2 weeks availability

£64.95 With FREE Saver Delivery


This issue contains 25 invited and contributed papers, all peer reviewed according to the American Ceramic Society Review Process. The latest developments in processing and manufacturing technologies are covered, including green manufacturing, smart processing, advanced composite manufacturing, rapid processing, joining, machining, and net shape forming technologies. These papers discuss the most important aspects necessary for understanding and further development of processing and manufacturing of ceramic materials and systems.

Create a review


Preface ix Introduction xi GREEN MANUFACTURING AND SMART PROCESSING Securing the Supply of Precious and Special Metals-The Need of Closing the Loop 3 Christian Hageluken Mechanical Properties of Cr-Si-N-0 Thin Films Deposited by RF Reactive Unbalanced Magnetron Sputtering 15 Jun Shirahata, Tetsutaro Ohori, Hiroki Asami, Tsuneo Suzuki,Tadachika Nakayama, Hisayuki Suematsu, and Koichi Niihara Room-Temperature Deposition and Magneto-Optical Properties of Transparent Cobalt/Lead Zirconate Titanate (PZT) Nanocomposite Films by Aerosol Deposition Jae-Hyuk Park and Jun Akedo Influence of Dispersant on Rheology of Zirconia-Paraffin Feedstocks and Mechanical Properties of Micro Parts Fabricated via LPIM 31 Fatih A. Cetinel, Marcus Muller, Joachim Rogner, Werner Bauer, and Jurgen Hausselt ADVANCED COMPOSITE MANUFACTURING Fiber-Reinforced Ceramic Matrix Composites Processed by a Hybrid Process Based on Chemical Vapor Infiltration, Slurry Impregnation and Spark Plasma Sintering 47 Jerome Magnant, Rene Pailler, Yann Le Petitcorps, Laurence Maille, Alain Guette, Jimmy Marine, and Eric Philippe Manufacturing of the CMC Nose Cap for the Expert Spacecraft 59 Christian Zuber, Thomas Reimer, Kornelia Stubicar, Bernhard Heidenreich, and Hermann Hald The Nature of Silicon Carbide Phases Developed from Different Carbonaceous Sources and Its Impact on the Microstructure of C/C-SiC Composites 73 Andrew Leatherbarrow and Houzheng Wu Shaping Radiation Curable Colloidal Dispersions-From Polymer/Ceramic Fibers and Microspheres to Gradient Porosity Ceramic Bulk Materials 85 Yoram de Hazan, Maciek Wozniak, Judit Heinecke, Gregor Muller, Veronika Markl, and Thomas Graule Melt-Infiltration Processing of Titanium Carbide-Stainless Steel Cermets 97 Tyler Stewart, R. Bradley Collier, Zoheir N. Farhat, Georges J. Kipouros, and Kevin P. Plucknett Oxidation Behavior of Zirconium Diboride-Silicon Carbide Composites 105 Ipek Akin, Filiz Cinar Sahin, Onuralp Yucel, and Gultekin Goller RAPID PROCESSING Nano-Crystalline Yttria Samaria Codoped Zirconia: Comparison of Electrical Conductivity of Microwave and Conventionally Sintered Samples 115 Soumyajit Koley, Abhijit Ghosh, Ashok Kumar Sahu, and Ashok Kumar Suri Spark Plasma Sintering (FAST/SPS) of Novel Materials-Taking the Next Step Forward to Industrial Production 127 H. U. Kessel, J. Hennicke, R. Kirchner, andT. Kessel Rapid Manufacturing of Ceramic Parts by Selective Laser Melting 137 Jan Wilkes, Yves-Christian Hagedorn, Sorn Ocylok, Wilhelm Meiners, and Konrad Wissenbach JOINING AND MACHINING Active Metal Brazing and Characterization of Brazed Joints between Silicon Carbide and Metallic Systems 151 Bryan P. Coddington, Rajiv Asthana, Michael C. Halbig, and Mrityunjay Singh Joining of Silicon Nitride with Glass or Powder under Mechanical Pressure 163 Naoki Kondo, Hideki Hyuga, Takaaki Nagaoka, and Hideki Kita Fabrication of Thermodynamic Crystals by Structural Joining 169 Soshu Kirihara, Yasunori Uehara, and Youhei Takinami Effect of Various Factors on Interface Formation in Magnetic Pressure Seam Welding 175 Hisashi Serizawa, Isao Shibahara, Sherif Rashed, Hidekazu Murakawa, and Shinji Kumai Production Environment Laser Assisted Machining of Silicon Nitride 183 Federico Sciammarella, Joe Santner, Jeff Staes, Richard Roberts, Frank Pfefferkorn, Stephen T. Gonczy, Stefan Kyselica, and Ricardo Deleon NET SHAPE FORMING Gelcasting of High Performance Carbide Ceramics with Larger Size/Complex Shape 197 Dongliang Jiang Processing of Complex-Shaped Micro Parts by Reaction-Bonding and Sintering of Silicon Nitride 213 M. Muller, W. Bauer, R. Knitter, and J. Rogner Thermoplastic Ceramic Injection Molding of Zirconia Toughened Alumina Components 223 F. Kern, M. Abou El-Ezz, and R. Gadow Fabrication of Alumina Dental Crown Model with Biomimetic Structure by Using Stereolithography 239 Mitsuyori Suwa, Soshu Kirihara, and Taiji Sohmura Author Index 247

Product Details

  • publication date: 02/11/2010
  • ISBN13: 9780470594735
  • Format: Hardback
  • Number Of Pages: 260
  • ID: 9780470594735
  • weight: 532
  • ISBN10: 047059473X

Delivery Information

  • Saver Delivery: Yes
  • 1st Class Delivery: Yes
  • Courier Delivery: Yes
  • Store Delivery: Yes

Prices are for internet purchases only. Prices and availability in WHSmith Stores may vary significantly