Applications of Texture Analysis (Ceramic Transactions Series 201)

Applications of Texture Analysis (Ceramic Transactions Series 201)

By: A. D. Rollett (author)Hardback

Up to 2 WeeksUsually despatched within 2 weeks


This volume contains papers presented at The 15th International Conference on the Texture of Materials from June 1-5th, 2008 in Pittsburgh, PA. Chapters include: Thin Films Texture at Non-Ambient Conditions Novel Texture Measurement Techniques Including 3D Complex Oxides Interface Textures Recrystallization Texture Biomaterials Texture Effects on Damage Accumulation Digital Microstructures View information on Materials Processing and Texture: Ceramic Transactions, Volume 200 .


Preface. Acknowledgments. THIN FILMS (MICROELECTRONICS, HTSC). The Texture of Thin Nisi Films and Its Effect on Agglomeration ( K. De Keyser, C. Detavernier , R. L. Van Meirhaeghe, J. Jordan-Sweet, and C. Lavoie ). Epitaxial Substrates from Ni-Based Ternary Alloys With Cr and W ( D.P. Rodionov, I.V. Gervasyeva, Yu.V. Khlebnikova, and V.A. Kazantsev ). Cube Texture Formation in Ni-Pd and Ni-Pd-W Alloys For HTS Tapes ( I.V. Gervasyeva, D.P. Rodionov, Yu.V. Khlebnikova, G.A. Dosovitskii, and A.R. Kaul ). Texture of Rapidly Solidified Cu Thin Films Studied by SEM EBSD and TEM ( R. Zhong, A. Kulovits, J.M.K. Wiezorek, and J.P. Leonard ). Control of Texture in Polycrystalline Thin Films Used as Data Storage Media ( David E. Laughlin, Hua Yuan, En Yang, and Chun Wang ). Influences of Processing Parameters on Microstructures and Microtextures of Au Flip Chip Bonds During Microelectronics Packaging ( P Yang, C-M Li, D-M Liu, M Hung, M Li, and W-M Mao ). TEXTURE AT NON-AMBIENT CONDITIONS. In Situ Observation of Texture Evolution in Ti-10-2-3 ( Seerna L. Raghunathan, Richard Dashwood, Martin Jackson, Sven Vogel, and David Dye ). Study of Texture Evolution at High Strain Rates in FCC Materials ( Nilesh Gurao, Satyam Suwas, and Rajeev Kapoor ). Texture and Microstructure Development in Copper after Cryogenic Rolling and Heat Treatment ( A. Haldar, D. Das, and P.P. Chattopadhyay ). In-Situ EBSD Study of the a-y-a Phase Transformation in a Microalloyed Steel ( Lischewski, D. M. Kirch, A. Ziemons, and G. Gottstein ). Texture Changes during Phase Transformations Studied In Situ With Neutron Diffraction ( Hans-Rudolf Wenk ). NOVEL TEXTURE MEASUREMENT TECHNIQUES INCLUDING 3D. Three-Dimensional FIB-OIM of Ceramic Materials (Shen J. Dillon and Gregory S. Rohrer ). Comparison of X-Ray and EBSD Textures for Back-Annealed AI-Mg Alloys ( O. Engler ). A New Method for Quantification of Texture Uniformity of Plate ( Peter Jepson and Robert Bailey ). Separating Coincident Electron Backscatter Diffraction Patterns Near Interfaces ( Josh Kacher, Brent L. Adarns, David Fullwood, and Colin Landon ). Rapid Texture Determination Based on Two Dimensional X Ray Detector ( Weimin Mao ). Semiautomatic Determination of Orientations and Elastic Strain from Kossel Microdiffraction ( Adam Morawiec, Raphael Pesci, and Jean-Sebastien Lecomte ). Statistically Reliable EBSD Analysis Method of Grain Boundary Characterization ( D.H. Kim, J.Y.Kang, D.I. Kim, E.K. Her, S.J. Kim, H.N. Han, K.H. Oh, and H.C. Lee ) 3D Microstructures and Textures of a Plane Strain Compressed {110} <112> AI-0.3# Mn Single Crystal ( H. Paul, J.H. Driver, and CI. Maurice ). Three Laws of Substructure Anisotropy of Textured Metal Materials, Revealed by X-Ray Method of Generalized Pole Figures ( Yuriy Perlovich, Margarita Isaenkova, and Vladimir Fesenko ). 3D-Microstructural and Texture Characterization in Different Length Scales ( Roumen Petrov and Patricia Gobernado Hernandez, Orlando Leon Garcia, Hemant Sharma, and Leo Kestens ). Local Crystal Rotations of Bulk Grains by High-Resolution EBSD during Hot PSC of Al-0.1 # Mn Polycrystals ( Romain Quey, David Piot, and Julian Driver ). Grain Boundary Orientations in a Fe-Mn-Cu Polycrystalline Alloy ( M. Takashima and P. Wynblatt ). Development of a TEM-Based Orientation Microscopy System ( S. Zaefferer and G. Wu ). COMPLEX OXIDES AND OTHER COMPOUNDS. Domain Control Effect on Voltage-Strain in BaTi03 Single Crystal ( Yoshio Akimune, Kazuo Matsuo, Ryutaro Oishi, and Akira Okada ). Tentative Simulation of Crystal Rotation for NaCl Structures ( Hiroaki Masui ). INTERFACE TEXTURES. Grain Boundary Patterns in Dynamically Recrystallized Quartz Aggregates ( Cristiane Castro and Leonard0 Lagoeiro ). The Correlation between Grain Boundary Character and lntergranular Corrosion Susceptibility of 21 24 Aluminum Alloy ( L. H. Chan, H. Weiland, S. Cheong, G.S. Rohrer, and AD. Rollett ). Rodrigues-Frank Spaces for Misorientations and Orientation Relationships between Crystals of Any Two Crystallographic Point Groups ( Youliang He and John J. Jonas ). Origins of Texture Memory in Steels ( Bevis Hutchinson and Leo A.I. Kestens ). A Grain Boundary Analysis of Cemented Tungsten Carbides using OIM ( Vineet Kumar, Zhigang Zak Fang, S.I. Wright and M.M. Nowell ). The Effect of Grain and Phase Boundary Misorientation on Nucleation during Solid-state Phase Transformations in a Co-l5Fe Alloy ( H. Landheer, S.E. Offerman, and L.A.I. Kestens, T. Takeuchi, M. Enomoto, and Y. Adachi ). Microstructural Modification in a 150-1 5Ni-2.2 Mo-Ti Modified Austenitic Stainless Steel through Twin Induced Grain Boundary Engineering ( Sumantra Mandal, P.V. Sivaprasad, and V. Subramanya Sarrna ). Effect of Strain Path and Annealing on Development of Resistance to lntergranular Degradation in Austenitic Stainless Steels ( V. Randle, R. Jones, T.J. Marrow, and D. Engelberg ). Evolution of the Grain Boundary Character Distribution in Strontium Titanate during Grain Growth ( Herbert M. Miller and Gregory S. Rohrer ). A Model for the Origin of Anisotropic Grain Boundary Character Distributions in Polycrystalline Materials ( Gregory S. Rohrer, Jason Gruber, and Anthony D. Rollett ). Nucleation of the Primary Al Phase on TiAl3 during Solidification of a Hot-Dip Zn-11# Al-3#Mg-On2#SCi oating on Steel Sheet ( Kazuhiko Honda, Kohsaku Ushioda, and Wataru Yamada ). RECRYSTALLIZATION TEXTURE: RETROSPECTIVE VERSUS CURRENT PROBLEMS. Textural lnhomogeneity Effect during the Monte Carlo Simulation of the Abnormal Goss Grain Growth in Fe-3#Si Steel Grade HiB ( T. Baudin, R. Penelle, and D. Ceccaldi ). Avoiding Roping and Ridging in AA6XXX Sheets: Characterizing the Initial State ( T.A. Bennett, R.H. Petrov, and L.A.I. Kestens ). Development of Cube Texture in Cold-Rolled and Annealed Multilayer Tapes for Coated Superconductor Applications ( P.P. Bhattacharjee and R.K. Ray ). Effects of Elastic Modulus on Deformation and Recrystallization of High Purity Nb ( D. Baars, H. Jiang, T.R. Bieler, A. Zamiri, F. Pourboghrat, and C. Compton ). Through-Process Texture Modeling of AA6016 from Hot Rolling to Final Annealing ( C. Bollmann and G. Gottstein ). Cube Texture Due to Dynamic Recrystallization in Pb and Pb-62#Sn Alloys under Equal Chanel Angular Extrusion Processing ( R.E. Bolmaro, V.L. Sordi, M. Ferrante, WeiMin Gan, and H.-G. Brokmeier ). Annealing Texture Evolution ( I.L. Dillamore ). On the Stability of Recrystallization Textures in Low Alloyed Zirconium Sheets ( FranCois Gerspach, Nathalie Bozzolo, and Francis Wagner ). An Analysis of the Texture and Mean Orientation of Aluminium Alloy AA5052 Subjected to Forward and Reverse Hot Torsion and Subsequent Annealing ( O. Hernandez-Silva, B.P. Wynne, and W. M. Rainforth ). Evolution of {lll} Recrystallization Texture in Al-Mg-Si Alloy Sheets Processed by Symmetric and Asymmetric Combination Rolling ( Hirofumi Inoue, Satoshi Kobayashi, Masayuki Hori, Toshio Komatsubara, and Takayuki Takasugi ). Effect of External Constraint and Deviation from Ideal Orientation on Development of Rolling Texture in Pure Aluminum Single Crystal Having {l00} <001> Orientation ( Keizo Kashihara and Hirosuke lnagaki ). Nucleation and Growth of New Grains in Deformed Quartz Single Crystals ( Leonard0 Lagoeiro and Paola Barbosa ). Rolling and Annealing Textures of Silver Sheets ( Dong Nyung Lee, Heung Nam Han, and Se-Jong Kim ). Function of Layer Thickness on the Microstructural Evolution in Copper of Annealed Roll-Bonded CuNb Composites ( S.C.V. Lim and A.D. Rollett ). Influence of Taylor Factor M on Recrystallization of The Cube and Cube-Family Grains in FCC Metal ( Hiroaki Masui ). Multi-Cycle Pinch Welding of 304L Tubes: lnhomogeneities in Deformation and Recrystallization Textures and Microstructures ( C.T. Necker, A.N. Marchi, and M.G. Smith ). Effect of Mg Concentration on Texture Formation in AI-Mg Alloys during High Temperature Compression ( Kazuto Okayasu, Hiroki Takekoshi, Masayuki Sakakibara, and Hiroshi Fukutomi ). Ultra-Fine Grain Austenitic Stainless Steels: Influence of Texture during Recrystallization ( Angeline Poulon-Quintin, Stephanie Brochet, Jean-Bernard Vogt, Jean-Christophe Glez, and Jean-Denis Mithieux ). Patterns of Deformation and Associated Recrystallization in Warm/Hot Deformed AA6022 ( S. Raveendra, S. Mishra, H. Weiland, and I. Samajdar ). Studies on Texture and Microstructure of Cryorolled and Annealed Cu-5#AI, Cu-5#Zn Alloys ( V.L. Niranjani, Nilesh Gurao, U. Wendt, S. Suwas, and V. Subramanya Sarma ). Modeling of Texture Development during Tandem Hot Rolling of AA3103 ( C. Schafer, V. Mohles, and G. Gottstein ). Texture Modification in Asymmetrically Rolled Aluminum Sheets ( Jurij Sidor, Roumen Petrov, Alexis Miroux, and Leo Kestens ). In-Situ SEM/EBSP Analysis during Annealing in AI-Mg Alloys ( Yoshimasa Takayama, Kazuhiro Morita, Hajime Kato, and Yoshimasa Ookubo ). Oriented Grain Growth and the Effect of In-Situ Annealing on Texture in AlMn Alloys ( Caterina E. Tommaseo and H. Klein ). Subgrain Coarsening of Hot-Rolled AA5005 Aluminum Alloy: A Comparison between EBSD Observations and Monte Carlo ( Shengyu Wang, Mohammed H. Alvi, and Anthony D. Rollett ). Influence of Low Angle Grain Boundaries on Recrystallization ( Myrjam Winning and Dierk Raabe ). BIOMATERIALS. Comparison of Calcite Crystallographic Texture in the Shells of the Rhynchonelliform Brachiopod, Terebratulina Retusa and the Bivalve Mollusc, Mytilus Edulis ( M.Cusack, A. Perez-Huerta, P. Dalbeck, P. Chung, and M.R. Lee ). Wear Resistance and Texture Evolution of Ultra High Molecular Weight Polyethylenes during Uniaxial Compression ( D.S. Li, H. Garmestani, S.C. Davis, L.K. Moss, A.K. Siddiqi, J.B. Guthrie, N. Johansen, and L. Matrisciano ). Texture and Microstructure of Modern Rhynchonellide Brachiopod Shells-An Ontogenetic Study ( E. Griesshaber, R.D. Neuser, U. Brand, and W.W. Schmahl ). Peering Into the Eyes of Trilobites using EBSD ( C. Torney, M.R. Lee, and A.W. Owen ). Texture and Anisotropy of MP35N Wire for Conduct Leads ( Bernard Q. Li and Tom Steigauf ). Crystallographic Textures from the Exoskeleton of the Lobster Hornarus Arnericanus and Calculation of the Mechanical Properties of the Calcite Phase ( L. Raue, H. Klein, D. Raabe, and H. Fabritius ). TEXTURE EFFECTS ON DAMAGE ACCUMULATION. Experimental Characterization of the Effect of Crystallography on the Three Dimensional Nucleation and Growth of Fatigue Cracks in Metals ( J-Y. Buffiere, E. Ferrie, H. Proudhon and W. Ludwig ). Reversible Texture Transition during Accumulative Roll Bonding ( Naoya Kamikawa, Xiaoxu Huang, Grethe Winther, Nobuhiro Tsuji, and Niels Hansen ). Evolution of Grain Boundary Microstructures in Molybdenum by Thermomechanical Processing from Single Crystals ( Shigeaki Kobayashi, Sadahiro Tsurekawa, and Tadao Watanabe ). Local Characterization of Void Initiation on IF Steel by FIB-EBSD Technique ( Orlando Leon-Garcia, Roumen Petrov, and Leo Kestens ). Experimental and Simulation Study on Texture and Bendability of AA5XXX Aluminum Alloys ( Y. Liu, Z. Long, X. Y . Wen, S. Ningileri, and S. K Das ). Some Aspects on Grain Growth in ECAP Deformed and Heat Treated Aluminum 1.2# Hafnium Alloy ( O. Al-Buhamad, M.Z. Quadir, and M. Ferry ). Kinetic Measurements of Texture and Microstructural Evolution using Orientation Distribution Function and Residual Stress Relaxat ion ( S. Saimoto, J. Cooley, and C. Gabryel ). Texture and Micro-Hardness Evolution of Submicrograined Copper ( X. S. Yao, Y . D. Liu, Q. W. Jiang, X. Zhao, and L. Zuo ). DIGITAL MICROSTRUCTURES. A Model of Plastic Spin Taking into Account Grain Interaction During Rolling ( A. Fourty, J.W. Signorelli, and R.E. Bolmaro ). CPFEM Investigation of the Effect of Grain Shape on the Planar Anisotropy and the Shear Banding of Textured Metal Sheets ( Laurent Delannay, Maxime A. Melchior, Anand K. Kanjarla, Paul Van Houtte, and Javier W. Signorelli ). Modelling of Primary Recrystallization using Digital Microstructures ( R.E. Loge, M. Bernacki, H. Resk, H. Digonnet, Y . Chastel, and T. Coupez ). Two-Phase Microstructure Generation in 3D Based on 2D Sections of a Nickel Alloy ( C.G. Roberts, S.L. Semiatin, and A.D. Rollett ). Evolution of Local Damage Variable and Its Rate of Strain-Softening Material in Tension Based on Nonlocal Theory ( X. B. Wang ). Grain Interaction and Related Elastic Fields at Triple Junction in Low Deformed IF Steel: Micromechanical Model and Reconstruction from EBSD Orientation Data ( A.A. Zisman, V.V. Rybin, M. Seefeldt, S. Van Boxel, and P. Van Houtte ). Gradient Matrix Method to Image Crystal Curvature with Discrete Orientation Data: Case Study of Triple Junction in Deformed IF Steel ( A.A. Zisman, M. Seefeldt, S. Van Boxel, and P. Van Houtte ). Author Index.

Product Details

  • ISBN13: 9780470408353
  • Format: Hardback
  • Number Of Pages: 836
  • ID: 9780470408353
  • weight: 1256
  • ISBN10: 0470408359

Delivery Information

  • Saver Delivery: Yes
  • 1st Class Delivery: Yes
  • Courier Delivery: Yes
  • Store Delivery: Yes

Prices are for internet purchases only. Prices and availability in WHSmith Stores may vary significantly