Biodental Engineering III

Biodental Engineering III

By: R. M. Natal Jorge (editor), Joao Manuel R. S. Tavares (editor), Mario A. P. Vaz (editor), Sonia M. Santos (editor), J. C. Reis Campos (editor)Hardback

1 - 2 weeks availability


Dentistry is a branch of medicine with its own peculiarities and very diverse areas of action, which means that it can be considered as an interdisciplinary field. Currently the use of new techniques and technologies receives much attention. Biodental Engineering III contains contributions from 13 countries, which were presented at BIODENTAL 2014, the 3rd International Conference on Biodental Engineering (Povoa do Varzim, Portugal, 22-23 June 2014). They provide a comprehensive coverage of the state-of-the art in this area, and address issues on a wide range of topics: - Aesthetics - Bioengineering - Biomaterials - Biomechanical disorders - Biomedical devices - Computational bio- imaging and visualization - Computational methods - Dental medicine - Experimental mechanics - Signal processing and analysis - Implantology - Minimally invasive devices and techniques - Orthodontics - Prosthesis and orthosis - Simulation - Software development - Telemedicine - Tissue engineering - Virtual reality Biodental Engineering III will be of interest to academics and others interested and/or involved in biodental engineering.

Create a review


Acknowledgements Preface Thematic sessions Scientific committee Contributed papersA variable finite element model of the human masticatory system S. Martinez, J. Lenz, K. Schweizerhof & H.J. Schindler Occlusal splint vs. anterior deprogrammer in bruxism therapy-is surface electromyography a valid tool? B. Dalewski & B. Fraczak Fracture toughness in interface systems Ni-Cr/ceramic, alumina/ceramic and zirconia/ceramic C.P.S. Porto, M. Parente, R.M.N. Jorge, L.C. Pereira & S. Griza The use of GBR in bone regeneration: An histologic study in the rabbit model I. Guerra, M.H. Figueiral, J.C.R. Campos, F. Branco, M. Vasconcelos, A. Afonso & R.Z. Gomes Effect of repeated tightening and loosening cycles of prosthetic screws in the micromovements of the abutment-implant assembly: A pilot study A. Messias, S. Rocha, N. Calha, P. Nicolau, F. Guerra & M.A. Neto Stress analysis of human periodontal ligament: Implications for its damage A.P. del Palomar, U. Santana-Mora, J. Cegonino, U. Santana-Penin, A. Calvo-Echenique & M.J. Mora Parametric evaluation of cortical bone thickness behavior on stress/strain of a dental implant J.P. de Oliveira Freitas, V. Bianco, J.H. Rubo, P.J.P. Goncalves & E.A.C. Sousa 3D Finite Element biomechanical model of the mandible-mucosa-expander apparatus set I. Braga, D. Rocha, R. Utsch, E.L. Casas, R. Andrade, R. Braga, R.M.N. Jorge & P.A.L.S. Martins Computer-aided design and manufacturing of dental implants with irregular geometries J. Chen, X. Chen, X. Zhang, O. Eichstadt, R. Du, F. Deng & Z. Zhang Automatic reconstruction of dental CT images using optimization P.H.J. Amorim, T.F. de Moraes, J.V.L. da Silva, H. Pedrini & R.B. Ruben Overbleaching effects on mineral content and roughness of human enamel M.S.F. de Miranda, R.S. Santos, M.J. dos Anjos, E.M. da Silva & C.R. Perez The assessment of the generated temperature by the drill bit in the bone tissue C.T. Sampaio, E.M. Fonseca, J.E. Ribeiro & R. Cerqueira The CAD technology in removable prosthodontics M.A. Sampaio-Fernandes, M. Sampaio-Fernandes, P. Fonseca, P.R. Almeida & M.H. Figueiral Clinical trial-in vivo endosseous implants micromovements measuring with 3D Digital Image Correlation method T. Rodrigues, F. Moreira, F. Guerra, P. Nicolau & M.A. Neto Simulation of remodeling of tissue engineered condylar cartilage under static hydrostatic pressure C. Bandeiras, A. Completo & A. Ramos Cyclic fatigue resistance of five rotary endodontic instruments B. Chaveli-Diaz, L. Forner, C. Llena, R. Madureira & F. Tadeu A biomechanical analysis of a maxillary overdenture retained by divergent implant attachments A. Miler, A. Correia, J.M. Rocha, J.C.R. Campos, N.V. Ramos & M.A. Vaz Effects of micromovement on the strain distribution of an implant supported zirconia dental bridge structure during loading: A 3D digital image correlation and 3D finite element analysis N. Calha, T. Rodrigues, A. Messias, L. Roseiro, P. Nicolau & M.A. Neto Comparative analysis of mandibular symphysis plates 1 J.C. Dinis, D.T. Kemmoku, P.Y. Noritomi, J.V.L. Silva & R.B. Ruben Effect of hydrogen peroxide on the inorganic composition of enamel R.M. Moreira, F.S. Calazans, A.C. Lamosa, R.S. Santos, M.J. dos Anjos, J.T. de Assis & M.S. Miranda Integration of image processing and 3D techniques to simulate aesthetic dental treatments R. Pulido, J.J. Jimenez & A. Rodriguez Analysis of autoclave induced dimensional changes on addition silicones M. So, O. Lino, P.R. Almeida, C. Leal, J.C.R. Campos & J. Sampaio-Fernandes Relationship between implant primary stability (torque and ISQ) and bone density assessed by CBCT-clinical trial R.Z. Gomes, L.L. da Silva, J. Coimbra, I. Guerra, M. Vasconcelos, A. Correia & A.C. Braga Fracture resistance of single-tooth implant-supported P.A.G. Piloto & J.F. Piloto An electromagnetic tracker system for the design of a dental superstructure A.H.J. Moreira, S. Queiros, N.F. Rodrigues, A.C.M. Pinho, J.C. Fonseca & J.L. Vilaca Optimization of a perfusion bioreactor for tissue engineering D. Freitas, H.A. Almeida & P. Bartolo Reinforced PCL scaffolds with Eggshell powder S.I. Biscaia, T.F. Viana, H.A. Almeida & P. Bartolo Optimizing regions for characterization of thermal images in medical applications A. Duarte, L. Carrao, M. Espanha, T.F. Viana, D. Freitas, P. Bartolo, P. Faria & H.A. Almeida Mechanical behavior of dentures clasps in acetal resin and cobalt-chromium: A numerical analysis A.R.D. Lopes, A. Correia, J.C.R. Campos, N.V. Ramos & M.A. Vaz Gingiva Assessment Tool-a clinical decision support system to evaluate the esthetic risk for gingiva-shade ceramics in a fixed dental prosthesis P.C. Viana, A. Correia, I. Lopes, Z. Kovacs & L. Eustaquio Geometric and structural comparison of anatomic models R. Zeibak, D. Freitas, H.A. Almeida & P. Bartolo Finite element analysis of bio-inert mass effect on stress reduction in bone-dental implant interface G. Mehdi, A. Belarbi, B. Mansouri & Z. Azari Ideal spacing according to different types of cement-Everest system (KaVo(R)) P. Rocha-Almeida, P. Canico, C. Leal, J. Reis-Campos & J. Sampaio-Fernandes Time dependent constitutive model for a biopolymer derived from castor oil polyurethane A.C. Vieira, V. Tita, R.R.C. da Costa & R.M. Guedes IL1 gene cluster polymorphisms and peri-implant disease M. Sampaio-Fernandes, P. Vaz, P. Fonseca, J. Reis-Campos & M.H. Figueiral Quality evaluation of websites with information on child dental trauma in Portuguese language M. Crespo, J. Carvalho, A. Correia & P. Mesquita Numerical analysis of a teeth restoration: A meshless method approach C.S.S. Tavares, J. Belinha, L.M.J.S. Dinis & R.M.N. Jorge The bone tissue remodelling analysis in dentistry using a meshless method J. Belinha, L.M.J.S. Dinis & R.M.N. Jorge Dental tissue classification using computational intelligence and digital image analysis G. Vaccaro & J.I. Pelaez Influence of composite temperature on the marginal seal in dental restorations S.A. Bote, J.M. Arroyo, J.M. Osorio, P.C. Lobato & M.C.M. Cespedes Raman Confocal Microscopy to study aesthetic restorative materials S.A. Bote, J.M. Arroyo, J.M. Osorio, P.C. Lobato & M.C.M. Cespedes Biomechanical analysis of typical structured dental implants and surrounding bone tissues X. Zhang, X. Chen, G. Zhang & J. Chen Characterization of trabecular bone morphology by isolation and construction of cubic models using computerized microtomography P. Carvalho-Lobato, G. Vallespi-Miro, V. Tallon-Walton, M.C. Manzanares-Cespedes, I. Valdivia-Gandur, S. Arroyo-Bote, J. Martinez-Arroyo, J. Martinez-Osorio & M. Herrera-Lara Optimization of the procedure for obtaining DPSCs by means of fragile fracture in clean room conditions C. Paganelli, A. Lanfranchi, F. Porta, I. Valdivia-Gandur, S. Arroyo-Bote, J. Martinez-Arroyo, J. Martinez-Osorio, P. Carvalho-Lobato, V. Tallon-Walton & M.C. Manzanares-Cespedes Evaluation of collagen fibers orientation around different connection implants M.A.R. Araujo, D.S.M. Castro, G.M.P. Juanito, M.A.P.P.N. Oliveira, C.A.M. Benfatti, R.S. Magini, A. Piattelli & C.R.P. Araujo Evaluation of the bone formation on titanium implants electrically stimulated: Study in dogs L.M. Bins-Ely, E.B. Cordero, C.A.M. Benfatti & R.S. Magini Thermal residual stresses in functionally graded dental restorations B. Henriques, R.M. Nascimento, G. Miranda, F. Silva & J.C.M. Souza Study of the porcelain powder injection parameters for the production of zirconia reinforced porcelain composites R.L.P. Santos, B. Henriques, R.M. Nascimento, F.V. Motta, F. Silva & J.C.M. Souza A finite element study of the Quad-helix appliance deformation when submitted to a force A.P. Botto, M.A. Vaz & J.M. Ustrell Evaluation of orthodontic forces applied by the Quad-helix apparatus A.P. Botto, M.A. Vaz & J.M. Ustrell Degradation modelling of bio-polymers used as dental scaffolds J. Tarrio-Saavedra, S. Naya, J. Lopez-Beceiro, S. Zaragoza, A. Alvarez, S. Quintana-Pita & F.J. Garcia-Saban Preliminary inertial study of body postures during dental procedures V. Silva, J. Reis-Campos, M.H. Figueiral, P. Fonseca, M.E. Pinho & M.A. Vaz All-ceramic CAD-CAM Maryland bridge-a numerical stress analysis I. Lopes, A. Correia, P.C. Viana, Z. Kovacs, N. Viriato, J.C.R. Campos & M.A. Vaz Evaluation of the effects produced by different insertion torques on the internal surface of the neck of different implants systems 2 M. Ferreira, M.M. Pinho, M.C. Manso, R.F. Almeida, M.A. Vaz & P. Mesquita Author index

Product Details

  • publication date: 11/06/2014
  • ISBN13: 9781138026711
  • Format: Hardback
  • Number Of Pages: 318
  • ID: 9781138026711
  • weight: 725
  • ISBN10: 1138026719

Delivery Information

  • Saver Delivery: Yes
  • 1st Class Delivery: Yes
  • Courier Delivery: Yes
  • Store Delivery: Yes

Prices are for internet purchases only. Prices and availability in WHSmith Stores may vary significantly