Requirements for Electrical Installatio... | WHSmith Books
Requirements for Electrical Installations, IET Wiring Regulations, Seventeenth Edition, BS 7671:2008+A3:2015 (Electrical Regulations)

Requirements for Electrical Installations, IET Wiring Regulations, Seventeenth Edition, BS 7671:2008+A3:2015 (Electrical Regulations)

By: The Institution of Engineering and Technology (author)Paperback

In Stock

£76.47 RRP £84.97  You save £8.50 (10%) With FREE Saver Delivery

Description

The IET Wiring Regulations are of interest to all those concerned with the design, installation and maintenance of electric wiring in buildings. The market includes electricians, electrical contractors, consultants, local authorities, surveyors and architects. This book will also be of interest to professional engineers, as well as students at university and further education colleges. All users of the IET Wiring Regulations need to be aware of the coming changes in Amendment 3 to the 17th Edition (BS 7671:2008+A3:2015). Potentially life-saving changes make this a vital update. These changes include (but are not limited to) amendments in the following areas: Consumer units (to come into effect January 2016)Wiring in escape routesChanges to earth fault loop impedances for all protective devicesUpdated EIC and EICR formsChanges to definitions throughout the Regulations Amendment 3 published on 5 January 2015 and comes into effect on 1 July 2015. All new installations from this point must comply with Amendment 3 to BS 7671:2008.

Contents

Introduction to BS 7671:2008(2015) Part 1: Scope, object and fundamental principles Chapter 11: ScopeChapter 12: Object and effectsChapter 13: Fundamental principles Part 2: Definitions Part 3: Assessment of general characteristics Chapter 31: Purpose, supplies and structureChapter 32: Classification of external influencesChapter 33: CompatibilityChapter 34: MaintainabilityChapter 35: Safety servicesChapter 36: Continuity of service Part 4: Protection for safety Chapter 41: Protection against electric shockChapter 42: Protection against thermal effectsChapter 43: Protection against overcurrentChapter 44: Protection against voltage disturbances and electromagnetic disturbances Part 5: Selection and erection of equipment Chapter 51: Common rulesChapter 52: Selection and erection of wiring systemsChapter 53: Protection, isolation, switching, control and monitoringChapter 54: Earthing arrangements and protective conductorsChapter 55: Other equipmentChapter 56: Safety services Part 6: Inspection and testing Chapter 61: Initial verificationChapter 62: Periodic inspection and testingChapter 63: Certification and reporting Part 7: Special installations or locations Section 700 GeneralSection 701: Locations containing a bath or showerSection 702: Swimming pools and other basinsSection 703: Rooms and cabins containing sauna heatersSection 704: Construction and demolition site installationsSection 705: Agricultural and horticultural premisesSection 706: Conducting locations with restricted movementSection 708: Electrical installations in caravan / camping parks and similar locationsSection 709: Marinas and similar locationsSection 710: Medical locationsSection 711: Exhibitions, shows and standsSection 712: Solar photovoltaic (pv) power supply systemsSection 714: Outdoor lighting installationsSection 715: Extra-low voltage lighting installationsSection 717: Mobile or transportable unitsSection 721: Electrical installations in caravans and motor caravansSection 722: Electric vehicle charging installationsSection 729: Operating and maintenance gangwaysSection 740: Temporary electrical installations for structures, amusement devices and booths ...Section 753: Floor and ceiling heating systems Appendices 1: British standards to which reference is made in this standard2: Statutory regulations and associated memoranda3: Time/current characteristics of overcurrent protective devices and RCDs4: Current-carrying capacity and voltage drop for cables5: Classification of external influences6: Model forms for certification and reporting7: Harmonized cable core colours8: Current-carrying capacity and voltage drop for busbar trunking and powertrack systems9: Definitions - multiple source, d.c. and other systems10: Protection of conductors in parallel against overcurrent11: Effect of harmonic currents on ... Moved to Appendix 4 secs 5.5 and 5.612: Voltage drop in consumers' installations Moved Appendix 4 sec 6.413: Methods for measuring the insulation resistance/impedance of floors and walls ...14: Measurement of earth fault loop impedance: consideration of the increase of ...15: Ring and radial final circuit arrangements, Regulation 433.116: Devices for protection against overvoltage Table of figuresTable of tablesIndex

Product Details

  • ISBN13: 9781849197694
  • Format: Paperback
  • Number Of Pages: 496
  • ID: 9781849197694
  • ISBN10: 1849197695

Delivery Information

  • Saver Delivery: Yes
  • 1st Class Delivery: Yes
  • Courier Delivery: Yes
  • Store Delivery: Yes

Prices are for internet purchases only. Prices and availability in WHSmith Stores may vary significantly

Close