Innovation, Communication and Engineering

Innovation, Communication and Engineering

By: Artde Donald Kin-Tak Lam (editor), Stephen Prior (editor), Teen-Hang Meen (editor)Hardback

1 - 2 weeks availability

£167.00 With FREE Saver Delivery


This volume represents the proceedings of the 2013 International Conference on Innovation, Communication and Engineering (ICICE 2013). This conference was organized by the China University of Petroleum (Huadong/East China) and the Taiwanese Institute of Knowledge Innovation, and was held in Qingdao, Shandong, P.R. China, October 26 - November 1, 2013. The conference received 653 submitted papers from 10 countries, of which 214 papers were selected by the committees to be presented at ICICE 2013. The conference provided a unified communication platform for researchers in a wide range of fields from information technology, communication science, and applied mathematics, to computer science, advanced material science, design and engineering. This volume enables interdisciplinary collaboration between science and engineering technologists in academia and industry as well as networking internationally. Consists of a book of abstracts (260 pp.) and a USB flash card with full papers (912 pp.).

Create a review


Advanced material science & engineering Investigation on optical properties of titanium dioxide films from TiO2 and Ti3O5 starting materials annealed at various temperatures S.-C. Shei A visible-blind Mg-doped ZnO nanorods photosensor S.J. Young, Y.H. Liu, T.H. Meen,W.Water, C.H. Hsiao & L.W. Ji Preparation of thin Palladium composite membrane by an ultrasound-assisted electroless deposition technique Y.-T. Chou, P.-H. Hsu, K.-S. Hsu, J.-M. Chen, M.-C.Wei, Y.-C. Yang & T.-C. Huang High strain rate shear characteristic and fracture feature of inconel 690 alloy T.H. Chen, T.H. Fang &T.C. Cheng Optimization of composite laminates by a genetic algorithm S.-F. Hwang &Y.-C. Hsu Synthesis and characterization of CuInSe2 thin film via a low temperature solid state reaction from CuSe and InSe powders K.-C. Hsu, J.-D. Liao, P.-Y. Lin,W.-C. Huang, I.-T. Tang & Y.-S. Fu Effects of UV illumination on oxygen detection for ZnO film prepared by thermally oxidized Zn on sapphire substrate C.-C. Yu, Y.-T. Hsu,W.-H. Lan, M.-C. Shih, J.-H. Hong, K.-F. Huang & C.-J. Huang Using Taguchi method for prepared gel electrolyte and applied in the dye-sensitized solar cells W.D. Hsu, J.-K. Tsai, T.-C.Wu, J.-S. Zhou, J.-L. Li, J.-H. Liao & T.-H. Meen Thermoelectric properties of Bi2Te3 thin films prepared by thermal evaporation method J.-M. Lin, Y.-C. Chen, C.-P. Lin, C.-Y.Wen,W.-T. Chang, J.-S. Fan & C.-M.Wang Self-assembly and gelation mechanism of poly(3-hexylthiophene) polymer chains in xylene solution J.-H. Chen, Y.-H. Cheng & L.-C. Chen Annealing effect on the optical and electrical properties of Al-doped ZnO transparent conducting films C.Y. Kung, F.H.Wang, C.L. Huang, T.T. Lin & S.L. Young Optimization of small molecule organic solar cells based on Boron Subphthalocyanine Chloride (SubPc) and fullerene (C60) J.-C. Ke, Y.-H.Wang, C.-J. Huang, P.-H. Huang & C.-C. Kang Effect of multi-trapping layers on high color stability of white organic light-emitting diode (WOLED) K.-L. Chen, C.-J. Huang, F.-Y. Lin, D.-W. Chou, T.-H. Meen,W.-R. Chen & C.-H. Chen A study on the influence of cooling processing on residual stress in carbon fiber reinforcement polymer during the curing process of composite laminates C.-C. Chiang, L. Tsai &V.V. Thuyet Using the Taguchi methodology for optimizing of porosity formation in automobile starter motor casing in pressure die casting Q.-C. Hsu &A.T. Do Effect of alkaline sources on the characteristics and photovoltaic performance of vertical ZnO nanorods-based dye sensitized solar cells L.-C. Chen, G.-W.Wang, S.-W. Li & J.-H. Chen Surface hardening of Ti-15V-3Al-3Cr-3Sn alloy after cyclic hydrogenation and subsequent solution treatment C.-L. Huang, Y.-J. Gao, T.-L. Chuang, C.-J. Kuo & T.-I.Wu Co-sensitization effect of orgnic/inorganic dyestuffs in dye-sensitized photovoltaic cells C.-L. Lee,W.-H. Lee & C.-H. Yang Fabrication of open-end TiO2 nanotubes arrays on front-illuminated dye-sensitized solar cells S.-M. Chao, T.-H. Meen, Y.-T. Jhuo, J.-K. Tsai, T.-C.Wu, K.-C. Lee, C.-T. Ho, L.-W. Ji & C.-J. Huang Triazoloisoquinoline based co-adsorbent in dye-sensitized photovoltaic cells C.-L. Lee,W.-H. Lee & C.-H. Yang Sn/3.0Ag/0.5Cu tin ball tensile creep test C.-M. Hsu, A.-d. Lin & J.-H. Kuang Structures of polyethylene (PE) chains in the square and triangle array SWCNT matrixes Y.-C.Wang, S.-P. Ju, G.-J. Huang, S.-C. Huang, H.-Z. Cheng, J.-S. Lin & H.-Y. Chen Synthesis of thick DLC film by hot filament assisted magnetron sputtering L.-C. Lin, S.-Y.Wu, Y.-J. Gao, C.-L. Huang &V.K.S. Hsiao Properties of as-deposited AZO films made by RF magnetron sputtering N.F. Shih, S.L. Young, B.J. Chen, P.C. Yao, T.T. Lin & C.Y. Kung Characteristics of UV photosensors with TiO2 nanorods L.-W. Ji,W.-S. Shih, H.W. Shiu, C.-H. Huang, C.-H. Liu & Y.F. Chen Analysis of transparency conducting AZO films by DC magnetron sputtering N.F. Shih, S.L. Young, B.J. Chen, P.C. Yao, T.T. Lin & C.Y. Kung Investigate the characteristics of Bi2O3-added 0.35 (K0.5Bi0.5TiO3)-0.65 BaTiO3 ceramics Y.-H. Lin, P.-S. Cheng, C.-G. Kuo,W.-J. Chiang & C.-F. Yang Mechanical properties and Cd-free buffer layer for CIGS solar cell T.-H. Fang, Y.-J. Hsiao & C.-H. Lu Communication science & engineering The effect of tip-lens on coupling efficiency of plastic optical fiber coupler J.-H. Kuang, C.-H. Yin, K.-Y. Chang & P.-C. Chen Implement the tracking and management system applied to mobile medical monitoring instruments in ward nursing station C.-C. Chen, P.-J. Chen, K.-H. Chuang & L.-C. Hsiao Dual-band meandered loop antenna for WLAN Dongle application W.-S. Chen, C.-M. Cheng, D.-H. Lee, C.-L. Ciou,W.-S. Sin & G.-Y. Cai A printed PIFA antenna for mobile handset application W.-S. Chen, C.-M. Cheng, D.-H. Lee, C.-K.Wang, C.-Y.Wu & J.-Y. Chang Dual-band loop antenna on soft contact lens for wireless ocular physiological monitoring C.H. Luo, S.H. Ting, B.M. Jeng,W.S. Chen & J.C. Chiou A SVM and RSSI model for in-hospital LBS technology T. Pan, C.-C. Shen, J.-C. Chang &Y.-F. Su A fiber optic grating array sensor system for the bridge monitoring T.-C. Liang, J.-L.Wu &Y.-L. Lin Study on a fiber-optic sensor for debris flow monitoring system T.-C. Liang, J.-L.Wu &Y.-L. Lin CPW-fed monopole dual-band ceramic substrate antenna with meandered SIR loading and ellipse defected ground plane C.F. Yang,W.S. Chen, C.K.Wang, C.M. Cheng & Z.W. Jhang Exploring the relationship between website interactivity and user experience Y.-H. Tu Phase diversity method embedded with optical CDMA on radio-over-fiber transmissions C.T. Yen & H.C. Cheng Design of a smartphone system for calculating calorie consumption by considering altitude information K.C. Lin, C.L. Chao, T. Erdene, M. Batzorig, Y.F. Chen, C.M. Tseng & P.J. Chen Understanding the effectiveness of BIS parametric model for monitoring sedation and depth of anesthesia in pediatric surgery H.-Y. Lee & C.-H. Yeng Development of active directional antennae for use in small UAVs Y. Guo & S.D. Prior Computer science & information technology Recreational devices controlled using an SSVEP-based Brain Computer Interface (BCI) S.C. Chen, A.R. See, C.H. Yeng, Y.J. Chen & C.K. Liang Understanding users' intentions to continue using social media: The role of cognitive absorption, social network, social presence M.-H. Hsu, L.-W. Chuang, S.-P. Chiu & W.-C. Chu The implementation of contrast media injection control and monitoring systems in the department of radiology of medical center H.-C. Yao, C.-H. Yeng,W.-S. Tzeng, G. Shu & P.-J. Chen A study on auction strategy for keyword search C.H. Hsu, S.C. Chen, C.H. Yeng, S.H. Chen, M.C. Hung & H.J. Ho A feasibility study of unity3D interactive engine development K.-S. Hsu, P.-Y. Lai, J.-F. Jiang, H.-Y.Wei, Y.-J. Chen & T.-H. Lee An objective identification of spectral distinctiveness on acoustic cue to subjects with hearing loss Y.J. Chen, M.D. Lee, J.L.Wu, H.M. Yang & Y.H. Lin A novel hybrid fuzzy FDM, AHP, TOPSIS approach for successful serious game design and evaluation framework C.-H. Su, K.T.-K. Chen & K.-K. Fan The dynamic investigation in the subject of science and technology for elementary school students T.-S. Lan, Y.-H. Lan, K.-L. Chen, P.-C. Chen & W.-C. Lin Design of a fall detection system based on wireless sensor network M.-C. Chen, Y.-W. Chiu, C.-H. Chen, Y.-H. Tang & E.-J. Chen The research of the self cognitive body figure and the healthy concepts influencing the BMI of children T.-S. Lan, K.-L. Chen, P.-C. Chen, C.-T. Ku, P.-H. Chiu & M.-H.Wang New approach to cloud-based enterprise resource planning system B.R. Chang, J.-C. Cheng, C.-M. Chen, C.-F. Huang & H.-F. Tsai An exploration of security and privacy among cloud computing C.-Y. Chen & J.-F. Tu An assessment of masses regards to shape C.Y.O. Yang, C.S. Lo, S.W. Chan, S.K. Lee & R.F. Chang The exploratory study on students' motivation of using human-computer interaction technology: An empirical study of second life for virtual reality S.-H. Kuo & C.Y. Shih Constructing an interactive multimedia lesson plan that fits in teaching scene L.-C. Lee, C.-H.Wu & K.-M. Yang Unity3D game-based learning system J.-C. Chen, C.-T. Hsu, M.-H. Chiang &Y.-J. Jiang An efficient framework for winning prediction in real-time strategy game competitions C.-J. Hsu, S.-S. Hung, J.T. Chen, D. Tsaih & J.-J. Tsay Electrical & electronic engineering Improved mechanism of Ni/Au schottky contact on surface treated ZnO film R.H. Chang, K.C. Yang, S.L. Yao, D.S. Liu, T.H. Chen, L.W. Lai & T.H. Lee Impact of a photovoltaic system to voltage variation and power losses on distribution feeders W.-L. Hsieh, C.-H. Lin, C.-S. Chen, C.-T. Hsu, C.-Y. Ho & H.-J. Chuang Design of 3.1-10.6 GHz UWB CMOS LNA using RC feedback and self-body bias technology Y.-C. Hsieh, M.-T. Hsu & W.-L. Huang Various nanopillars on GaN-based LED to enhace light-extraction efficiency by SILAR method S.-C. Shei Improvement of current blocking for GaN-based LEDs by treatments of Ar plasma on p-GaN surface X.F. Zeng, S.J. Chang, H.M. Lo & S.-C. Shei Enhanced light-extraction efficiency in GaN-based light-emitting diodes via nanopillars on roughened surface X.F. Zeng, S.J. Chang & S.-C. Shei Development of a hub motor with an integrated transmission hub for electric bicycles Y.-C.Wu & Z.-H. Sun Design of low voltage and low power 0.32V 0.4mW based on current reuse VCO with transformer feedback and body-biasing techniques M.-T. Hsu,W.-J. Li &Y.-R. Qiu Determination of thrust drop for high speed maglev train driven by linear synchronous motor W.-T. Tseng &Y.-T. Chang The simulation of software-defined nonlinear multi-stage rectifier and power matching for wireless power transmission W.-C. Lin, K.-Y. Lo, C.-L. Pan & C.-H. Chang Light rail transit systems impact on the unbalance of the distribution system C.-T. Hsu, H.-M. Huang, T.-J. Cheng & L.-J. Tsai A wisdom LED street lamp system combining with power and solar cells S.-F.Wang, B.-S. Huang, S.-R. Lay, Y. Chu, Y.-P. Liao, F.-H. Kao & A.-L. Liu Investigation of modulation strategies for three-phase three-level rectifier applications M.-T. Tsai, C.-L. Chu, C.-M. Mi, J.-Y. Jhang & B.-J. Jiang Design and implementation of a micro-inverter for grid-connected applications M.-T. Tsai, C.-L. Chu, C.-M. Mi, Y.-Y. Sie & J.-Y. Lin A novel ohmic contact method for Al/n-Si by inserting ultra-thin LiF N.-F.Wang, Y.-Z. Tsai, Y.-S. Cheng, M.-H. Chien & F.-H. Hsu Design of photo detectors for measuring solar power Y.-N. Chang Design of dimmable LED lighting sets with three windings multiple transformers H.-L. Cheng, C.-H. Chang, Y.-N. Chang, D.-C. Huang, C.-M. Kuo & S.-Y. Chan Hybrid grey model for Taiwan electronic product forecasting H.-L.Wong &W.-H. Tang Realization of a three-axis motion control system based on DSP and FPGA Y.-S. Kung, J.-M. Lin & H.-H. Chou Motion control of meal-assistance based on a five-axis modular robot arm Y.-S. Kung, M.-S.Wang, C.-M. Huang, B.T.H. Linh &T.-H. Jung Application of Genetic Algorithm in optimal robotic path planning S.S.-D. Xu, Y.-P.Wu &T.-C. Chang Gesture motion based interactive control system for humanoid robots M.Y. Shieh, J.S. Chiou, N.S. Pai & J.H. Li IoT applied in data transceiver J.-F. Tu & C.-Y. Chen Visual control of a stair-climbing robot M.-S.Wang, C.-M. Mi &Y.-M. Tu Adaptive fuzzy CMAC controller design for tracking of four-wheeled omnidirectional mobile robot T.-F.Wu, H.-C. Huang, S.S.-D. Xu & N.-T. Hu Effects of deposition power on the properties of the heterojunction diode based on a NiO/GZO bi-layer structure F.-H.Wang, C.-C. Huang & C.-F. Yang A machine learning approach to dynamic programming for stochastic process of speech recognition I.-J. Ding, C.-T. Yen & Y.-M. Hsu Mechanical & automation engineering Using CC-Link industrial communication on the implementation of motor HMI monitoring in lab practice Y.-M. Lee & K.-S. Hsu Micro-orifice structure fabricated using a one-step undercut etching technique for ultra-small water and chitosan droplets formations C.-H. Lin, C.-H. Lan & C.-H. Yang Optical fiber concentration sensor based on whispering gallery mode interference C.-C. Chiang, J.-C. Chao & C.-Y. Chien Design and fabrication of the piezoelectric actuator with double pushers S.-J. Chang & J. Chen Construction of the control system of cleaning robots with vision guidance T.-S. Lan, L.-J. Yeh, M.-C. Chiu &Y.-X. Hwang Ultrasound for optimizing dark-fermentation hydrogen production S.-Y. Hsia, Y.-T. Chou & C.-H.Wang Noise analysis of wagon transportation S.-Y. Hsia, Y.-T. Chou & J.-W. Cheng Effect of preforms on extrusion die filling of micro brass pin S.-Y. Hsia, C.-C. Chang,W.-S. Huang & Y.-C. Kuo Intelligent vision-based trajectory planning for spray painting using manipulator C.C. Peng, H.Y. Lin, Y.C. Peng, K.S. Hsu & M.G. Her Seawater desalination using electrodialysis process C.-R. Chen, S.-W. Perng & H.-Y. Chang The design and fabrication of a two-axis solar heat collection tracker for stirling engine applications T.C. Cheng,W.S. Lin, T.H. Chen, T.H. Fang & W.P. Chen Design optimization on the lower arm of motorcycle chassis using laminated structure with foam-core material Y.-T. Chou, S.-Y. Hsia & B.-W. Lee Delay pressure detection method to eliminate pump pressure interference on the downhole mud pressure signals Y. Shen, L. Zhang, S. Cui, Y. Su, L. Sheng & L. Li A novel application for enlarge focus area based on High Intensity Focused Ultrasound (HIFU) probe with a high directivity structure design Y.L. Yu, Y.T. Chao, J.Y. Yen, C.J. Hsu, M. Kam, M.C. Ho, Y.Y. Chen & F.L. Lian Dynamics stress analysis for a high rigidity bendable Minimal Invasive Surgical (MIS) instrument design Y.T. Chao, Y.L. Yu, J.Y. Yen, M. Kam, C.J. Hsu, S.T. Liu, M.C. Ho, Y.Y. Chen & F.L. Lian Effects of heat loss and friction on the performance of an air standard dual cycle J.-C. Lin & S.-S. Hou Performance characteristics of multi-port gas burners S.-S. Hou & C.-H. Chou Nonlinear vibration analysis of platform due to the base periodic excitation S.-M. Lin,W.-R.Wang, Y.-J.Wang & T.-C. Chen Strength analysis of blade of a vertical wind generator S.-M. Lin,W.-R.Wang, M.-J. Teng, C.-J. Lee, S.-J. Lee & Y.-C. Kuo A study of automatic welding system for spatial position measurement J.-C. Lin & K. Lee An optimization study of Coanda wall jet phenomena V. Inthasuwan, S.D. Prior & R. Collins Green technology & architecture engineering Effects of heat on building materials C.-R. Chen, H.-M. Chou, T.-N.Wu & A. Sharma Analysis of indoor sound propagation using finite element method S.-Y. Hsia &Y.-T. Chou Numerical simulation and design strategy for wind environments: A case study of the typical Southern Fujian village Y. Miao & S.-C. Chiou The establishment for home-ventilation soundproof walls by the nature-landscape basis model L.L. Chung, Y.L. Yu, Y.T. Chao, M. Kam, S.T. Liu &Y.C. Fan A structural design for soundproof ventilational environment with high performance and no energy consumption Y.L. Yu, L.C. Lee, Y.T. Chao, Y.C. Fan & C.J. Hsu Efficiency improvement of a diffusive solar cell window by optimizing the diffusion plate design with optical simulation C.W. Lai, R.T. Chen, T.C. Lin & C.C. Kang Research on bamboo craft development from perspective of green design H.-C. Chen, J.-C. Tu & S.-S. Guang Electric field analysis for a novel dual-electrode plug with low ignition voltage requirement C.L. Shen, J.-C. Su & T.-C. Liang Study of green building indicators in Taiwan sport stadiums P.-I. Lin A study of constructing the green indoors sustainable aquatic center Y.-H. Chou, K.-Y. Liu & T.-H. Liu High conductive and transparent poly(3,4-thylenedioxythiophene): poly(styrenesulfonate) films by adding the sulfuric acid in solar cell T.-H. Meen, Y.-H. Chen,W.-R. Chen,W.Water, K.-L. Chen, D.-W. Chou & C.-J. Huang Application of power electronics technology in renewable energy generation systems Q.-P. Luan, Y. Li, S. Zhang & P.-X. Luan Using web-based service to enhance communications in design process K.-H.Wen & A.D.K.-T. Lam Innovation design & creative design A study on the evaluation of sleeping effect for the photo-induced biofeedback fabric W.-C. Chu, H.-J. Lin & S.-P. Chiu Usability evaluation and investigation of subjective satisfaction of the online publishing software interface Y.-J. Lee & C.-J. Lin A study on information visualization with smart living technology - example by an interactive product "Serenity" P. Hsu & C.-M.Wang A study on the integration of holograms and package display technology Y.-L. Huang, P.-T. Ko, M.-H. Huang, P.-C. Chung & Y.-H. Chen Construction of innovative service system dresses for wedding photography J.-C. Tu & C.-L. Hu Exploration on the use of recycled plastic bottles for toy development J.-C. Tu & H.-S. Huang Application of CAN bus monitoring system for Ford Mustang cluster Y.-M. Lee, K.-S. Hsu & S.-B. Chang A learning achievement prediction model for meaningful learning designs K.-K. Fan, C.-H. Su, S.-Y. Deng &W.-J.Wang Employing logistic service model in eco-design modular furniture system P.C.-H. Huang, P.T.K. Hwang, G.-H. Kao &T.-J. Hsieh Investigating Novel Applications of the Coanda Effect for Small Morphing Unmanned Aircraft S.-T. Shen & S.D. Prior An analysis on Kenyahara and "void" design concept of MUJI X. Fan Fabrication of an 3D aspherical microlens for OLED with PDMS modified using a dry etching process Y.C. Chen, C.T. Pan, H.C.Wu, P.H. Lin, F.T. Hsu,W.C. Li & C.T. Pan A UTV hand tool measure the BMD of Calcaneus-A simulation model C.-H. Chang, I. Her & I.-T. Tang A study on Julia sets to generate visual aesthetic fractal patterns A.D.K.-T. Lam, G.-F. She, Z.-Q. Lin & Z.-W. Cai A study on network platform of corporate strategy Y.-L. Hsu, P.-L. Chang & D. Lin A research of assistive devices' design by using QFD - positioning chairs for CP children as example I.-J. Sung &T.-L. Lin Persuasive design aid for products leading to happy, healthy and sustainable lifestyle L.H. Shih &W.S. He An extensive QFD procedure for bicycle innovative design C.T.Wu, M.H. Shao & C.S.Wu Investigating performance and preference for novel 2D and 3D bookmark user interfaces S.-T. Shen & S.D. Prior Enjoy aging: Blending cultural creativity with technology T.Y. Chang, K.L. Huang & F.W. Tung Driving technological innovation through collaboration with design professionals F.W. Tung, Y.P. Chou &T.Y. Chang The appearance innovation of convenience store figurines in Taiwan M.T.Wang & C.C. Lai Industrial design & design theory Apply web-based analytic tool in stapler product form design S.-Y. Huang & C.-P. Kuo Application of content analysis method in constructing evaluation indicators of design students' competitive advantage J.-C. Tu, S.-P. Chiu,W.-C. Chu & L.-W. Chuang Head and neck support for cabin seat G.-H. Kao, T.K.P. Hwang & P.C.-H. Huang User autonomy: Creative experience in the process of interaction P.-L. Chang, D. Lin & Y.-L. Hsu A study on the consumer purchasing behavior and visual focus of DSLR digital cameras J.-S. Lin & S.-Y. Huang Decision-making mode of sustainable product development under EuP (Eco-Design Requirements for Energy-using Product) directive J.-C. Tu, K.-C. Lin & Y.-C. Huang The affective meanings influencing aesthetic preferences S.-C. Tung, S.-M. Huang & W.-J. Li The comparison of exploring realism between various model types on car styling design K.-M. Chen An interactive influential model of sustainable product development under corporate social responsibility in Taiwan J.-C. Tu, Y.-C. Huang & C.-Y. Hsu A novel design of lateral coachwork for noise reduction of Mass Rapid Transit (MRT) L.C. Lee, Y.L. Yu, Y.T. Chao, C.J. Hsu, S.T. Liu & Y.C. Fan Customer-oriented product design using an innovative integral scheme based on Kansei engineering and Kano model K.C.Wang & F.R. Ju Computational-fluid-dynamics simulation for charged-membrane filtration with spacer design 631 Y.-H. Cheng, W.-C. Tsai & S.-H. Cheng An initial study on the attitudes of NewYoung-Olds in Taiwan towards electronic pets K.C.K. Lee & W.L. Tang Pattern search and style analysis for the design of comic figures B.-S. Lin & S.-T. Tsai Study on development strategy of sustainable product design in product service system: Using ASUS technology products as an example H.-Y. Chen & J.-C. Tu Exploring emotional design of user's needs - green products as example T.-L. Lin &W.-Y. Tai Design management for positive creativity D.-B. Luh Cultural & creative research On the relations between the colour of museum collection derivation commodity and its cultural connotation: A case study of theWooden Deity of the Lord Tiger M.-Y. Hsu & S.-S. Guan The development and creating methods in digital ink painting D. Lin, P.L. Chang & Y.L. Hsu A study of the experimental teaching on sense of space and stereo visual illusion Y.-L. Huang A study of cultural and creative commodity innovation in the design business of the indicator P.-H. Yang & M.-C. Ho On the graphic ornamental pattern of the Kinmen traditional architecture C.-S. Tseng & Y.-F. Chen On the geometric arrangement ofWufeng and Banqiao Lin family Mansion and Garden in Taiwan C.-S. Tseng & Y.-Y.Wang Discussion on the research model of traditional settlement from the perspective of cultural routes-Take Tai-MIN area for instance Y. Miao & Y.-H.Weng Development of medical care in southern Taiwan - Medical College and Hospital National Cheng Kung University in case W.-H. Ting Kunishima Suiba's comic illustrations of Taiwan: The presentations of colonized culture under Japanese colonial rule H.-Y. Lin & Ph.D.L. Peng The development of Taiwan's Siraya local industries - learning fromYomitan village, Okinawa L.-H. Peng, C.-Y. Pan & T.-H.Wei Establishing principles and model of sustainable product development for enterprises under rental consumption of the product service system in Taiwan J.-C. Tu & Y.-C. Huang The classics-reading education modeling exploration for elementary schools in Taiwan through an application of CORPS framework C.-A. Tang, D.-S. Lin, L.-C. Chang & K.-M. Chen A study on design of manipulation of Shadow Puppet Game-based learning with Kinect Technique K.-K. Fan & P.-W. Hsiao Research on the methods of building brand image from the multimedia perspective Q. Li & H. Zhang A study on digital value-added applications of Chinese calligraphic fonts A.D.K.-T. Lam, K.-H.Wen & Y.-Y. Lee Examining artistic commodity design through the shift between art and design M.-H. Hsieh & S.-S. Guan The research of interactive performance with puppet in digital technology environment S.-M. Tseng & C.-M.Wang Interaction of space-time effect between De Qi of acupuncture and cerebral cortex-the clinical application in combined treatment of acupuncture, steroid and hyperbaric oxygen therapy in sudden deafness J.-J.Wen, H.-M. Chou, C.-K. Lee & H.-C. Lee A discussion on trademark designs of Taiwan's popular designer fashion labels T.-C. Kuo, H.-C. Chang &Y.-L. Huang Tackling the myth about the Chinese translation of the word "religion" by means of etymological analysis J.-W. Yu & H.-M. Chou Preliminary investigation into the roadside banquet culture in Taiwan C.-Y. Lin, H.-M. Chou & H.-Y. Chen Symbolic analysis and metaphorical character of ancient Chinese lighting fixtures Y.-R. Chiu, H.-M. Chou & H.-Y. Chen Lotus born from silt: Drawing from TangYa Lay's works to explore the use of reservoir silt in ceramics C.-W. Pai & L.-C. Tsai Creative sales for fruit vinegar - A market example based on Tang Po Vinegar H.-L. Kao, L.-C. Tsai & H.-C. Chang The creatively innovation of Shanghai-style Cheongsam in Taiwan - citing Londee and Shiatzy as examples H.-H. Lo, H.-M. Chou & M.-T. Tsai A study on development of industries related to Agarwood - taking Pingtung region in Taiwan as an example L.-C. Chin, H.-M. Chou & Y.-L. Huang Applied mathematics Stabilization of a class of singularly perturbed bilinear systems: Composite state-feedback control C.-J.Wang & J.-S. Chiou On iterative method for hierarchical fixed points problems and variational inequality problems Y.-C. Liou Management science System's marginal benefit from recycling and integration P.C. Yang & X.C. Lai Innovation management for precision machinery industry courses C.Y. Shih Independent directors and earnings management C.-Y. Hsu &Y.-C. Yang Development of sports center construction indicators P.-I. Lin A study of Grey Markov forecasting model - forecasting the trend of financial turmoil - the research analysis of Taiwan IC assembly industry L.-C. Lin & S.-Y.Wu Others Study of magnetic properties on magnetic nanostructures array with different pore distances C.-C. Hou,W.-A. Chen, C.-H. Huang, T.-H. Meen, J.-K. Tsai & T.-C.Wu Phase Change Material (PCMs) apply for high load gearbox improving peak heat load capacity C.-R. Chen & T.-N.Wu Simulation of drying chamber using different heat transfer/storage materials H.-M. Chou, C.-R. Chen, T.-N.Wu & A. Sharma The detection of biomolecules using self-assembled microspheres in an immunoassay C.-H. Chen, H.-S. Lin & J.R. Carey Application of information graphics in children's perceptions of unsafe act causing fires F.-S. Lin & C.-P. Hsieh The standardization of artificial emotion based on ontology K.-K. Fan, S.-Y. Deng, C.-H. Su & F.-Y. Chang Use a simple ultrasound tool to measure jaw bone - a porcine model C.-H. Chang, I. Her & I.-T. Tang Investigation of the sensing characteristics of TFBAR in liquid media Y.-C. Chen,W.-T. Chang, J.-M. Lin, J.-M. Jiang, C.-C. Cheng & K.-S. Kao An experimental study on thermal contact resistance between the AlN film and the copper specimen H.-M. Chou, J.-C.Wang & Y.-P. Chang Effects of nitride on friction and wear of low carbon alloy steel - SCM415 Y.-P. Chang, G.Wang, L.-M. Chu & Y.-C. Hwang A study on wear and thermal expansion for the materials of drive elements after the heat treatments with deep cryogenic treatment Y.-P. Chang, J.-H. Horng, L.-M. Chu & Y.-C. Hwang Self-oscillating push-pull high-voltage generator for a vehicle shock-absorber with electro-rheological fluid in a suspension system C.-L. Shen, T.-C. Liang & C.-C.Wang EEG coherence analysis to discriminate normal aging and MCI M.-C. Ho, T.-C. Chen, C.-F. Huang, C.-H. Yu, J.-M. Chen, R.-Y. Huang, H.-C. Ho & C.-J. Liu Study on a widespread diffuse cross-frequency interactive effects on compensation and connectivity by the bispectral analysis C.-J. Liu, C.-H. Yu, C.-F. Huang, R.-Y. Huang, C.-J.Wang, Y.-S. Liu, T.-C. Chen & M.-C. Ho The preliminary study of early church architecture development of the Presbyterian Church in Taiwan Y.-F. Chen & C.-K. Nieh Applying and developing E-learning to talents management S.-Y. Ho, H.-J. Fu & Y.-Y. Lin Personality traits influences on the knowledge sharing of faculty in the universities K.-S. Chang & S.-L. Lin The study of digital camera consumer's purchasing behavior F.-K. Hung, Y.-C. Lu & C.-L. Yang To escape singular positions on parallel milling machine by ACO method J.-C. Lin, Y.-M. Chang, Y.-S. Chen & C.-C. Chang Exploring the relationship within personal characteristics, aims and reasons of learning in further education by associating rule mining W.-C. Tsai A creative teaching strategies of consulting team teachers P.-Y. Chuang, S.-L. Ching & F.-M. Liu Competition and cooperation on freight between Hong Kong and Inland C.-M. Chang Author index

Product Details

  • publication date: 08/10/2013
  • ISBN13: 9781138001176
  • Format: Hardback
  • Number Of Pages: 260
  • ID: 9781138001176
  • weight: 589
  • ISBN10: 1138001171

Delivery Information

  • Saver Delivery: Yes
  • 1st Class Delivery: Yes
  • Courier Delivery: Yes
  • Store Delivery: Yes

Prices are for internet purchases only. Prices and availability in WHSmith Stores may vary significantly