Power Electronic Converters for Microgrids

Power Electronic Converters for Microgrids

By: Georgios I. Orfanoudakis (author), Mohammad A. Abu-Sara (author), Babar Hussain (author), Suleiman M. Sharkh (author)Hardback

Up to 2 WeeksUsually despatched within 2 weeks

Description

As concerns about climate change, energy prices, and energy security loom, regulatory and research communities have shown growing interest in alternative energy sources and their integration into distributed energy systems. However, many of the candidate microgeneration and associated storage systems cannot be readily interfaced to the 50/60 Hz grid. In Power Electronic Converters for Microgrids, Sharkh and Abu-Sara introduce the basics and practical concerns of analyzing and designing such micro-generation grid interface systems. Readers will become familiar with methods for stably feeding the larger grid, importing from the grid to charge on-site storage, disconnecting from the grid in case of grid failure, as well as connect multiple microgrids while sharing their loads appropriately. Sharkh and Abu-Sara introduce not only the larger context of the technology, but also present potential future applications, along with detailed case studies and tutorials to help the reader effectively engineer microgrid systems.

About Author

S. M. Sharkh is a Senior Lecturer at the School of Engineering Sciences, University of Southampton and the Managing Director of HiT Systems Ltd, which specializes in electromagnetic system analysis and design, control systems and web applications. He has approximately 17 years research experience in electrical and electromagnetic systems, and has been awarded numerous research grants leading to commercialized products in a number of related areas: grid connected PWM inverters, electric machines in harsh environments (high-speed, high temperature, high pressure, corrosive chemicals, submerged in liquids or underwater) PM machines (axial gap dc machines, VRPM transverse flux machines), characterization of and management of lithium ion batteries, sensorless control of PM machines, novel structurally integrated electric machines for marine thrusters and electromagnetic losses in high-speed machines, and microgrid intefaces. Sharkh has lectured on the subject of grid-connected inverters and their control to both undergraduate and postgraduate students, as well as companies. He holds a BEng and PhD in electrical engineering from the University of Southampton. M. A. Abu-Sara works with Bowman Power Systems, where he is the lead engineer in designing and developing systems for micro-generation. He holds a PhD in Electrical Engineering from the University of Southampton.

Contents

About the Authors xi Preface xiii Acknowledgments xv 1 Introduction 1 1.1 Modes of Operation of Microgrid Converters 2 1.1.1 Grid Connection Mode 2 1.1.2 Stand-Alone Mode 3 1.1.3 Battery Charging Mode 3 1.2 Converter Topologies 4 1.3 Modulation Strategies 6 1.4 Control and System Issues 7 1.5 Future Challenges and Solutions 9 References 10 2 Converter Topologies 13 2.1 Topologies 13 2.1.1 The Two-Level Converter 13 2.1.2 The NPC Converter 14 2.1.3 The CHB Converter 15 2.2 Pulse Width Modulation Strategies 16 2.2.1 Carrier-Based Strategies 17 2.2.2 SVM Strategies 22 2.3 Modeling 27 References 28 3 DC-Link Capacitor Current and Sizing in NPC and CHB Inverters 29 3.1 Introduction 29 3.2 Inverter DC-Link Capacitor Sizing 30 3.3 Analytical Derivation of DC-Link Capacitor Current RMS Expressions 32 3.3.1 NPC Inverter 33 3.3.2 CHB Inverter 36 3.4 Analytical Derivation of DC-Link Capacitor Current Harmonics 37 3.4.1 NPC Inverter 38 3.4.2 CHB Inverter 39 3.5 Numerical Derivation of DC-Link Capacitor Current RMS Value and Voltage Ripple Amplitude 41 3.6 Simulation Results 42 3.7 Discussion 45 3.7.1 Comparison of Capacitor Size for the NPC and CHB Inverters 45 3.7.2 Comparison of Presented Methods for Analyzing DC-Link Capacitor Current 46 3.7.3 Extension to Higher-Level Inverters 48 3.8 Conclusion 48 References 48 4 Loss Comparison of Two- and Three-Level Inverter Topologies 51 4.1 Introduction 51 4.2 Selection of IGBT-Diode Modules 53 4.3 Switching Losses 54 4.3.1 Switching Losses in the Two-Level Inverters 54 4.3.2 Switching Losses in the NPC Inverter 57 4.3.3 Switching Losses in the CHB Inverter 58 4.4 Conduction Losses 58 4.4.1 Conduction Losses in the Two-Level Inverter 60 4.4.2 Conduction Losses in the NPC Inverter 61 4.4.3 Conduction Losses in the CHB Inverter 63 4.5 DC-Link Capacitor RMS Current 65 4.6 Results 69 4.7 Conclusion 70 References 71 5 Minimization of Low-Frequency Neutral-Point Voltage Oscillations in NPC Converters 73 5.1 Introduction 73 5.2 NPC Converter Modulation Strategies 74 5.3 Minimum NP Ripple Achievable by NV Strategies 77 5.3.1 Locally Averaged NP Current 78 5.3.2 Effect of Switching Constraints 79 5.3.3 Zero-Ripple Region 81 5.3.4 A Lower Boundary for the NP Voltage Ripple 81 5.4 Proposed Band-NV Strategies 83 5.4.1 Criterion Used by Conventional NV Strategies 83 5.4.2 Proposed Criterion 84 5.4.3 Regions of Operation 85 5.4.4 Algorithm 88 5.4.5 Switching Sequences Conversion to Band-NV 90 5.5 Performance of Band-NV Strategies 91 5.5.1 NP Voltage Ripple 91 5.5.2 Effective Switching Frequency Output Voltage Harmonic Distortion 93 5.6 Simulation of Band-NV Strategies 94 5.7 Hybrid Modulation Strategies 100 5.7.1 Proposed Hybrid Strategies 101 5.7.2 Simulation Results 102 5.8 Conclusions 106 References 107 6 Digital Control of a Three-Phase Two-Level Grid-Connected Inverter 109 6.1 Introduction 109 6.2 Control Strategy 112 6.3 Digital Sampling Strategy 113 6.4 Effect of Time Delay on Stability 115 6.5 Capacitor Current Observer 116 6.6 Design of Feedback Controllers 119 6.7 Simulation Results 121 6.8 Experimental Results 123 6.9 Conclusions 127 References 128 7 Design and Control of a Grid-Connected Interleaved Inverter 131 7.1 Introduction 131 7.2 Ripple Cancellation 135 7.3 Hardware Design 137 7.3.1 Hardware Design Guidelines 138 7.3.2 Application of the Design Guidelines 145 7.4 Controller Structure 146 7.5 System Analysis 149 7.5.1 Effect of Passive Damping and Grid Impedance 151 7.5.2 Effect of Computational Time Delay 151 7.5.3 Grid Disturbance Rejection 154 7.6 Controller Design 154 7.7 Simulation and Practical Results 158 7.8 Conclusions 167 References 167 8 Repetitive Current Control of an Interleaved Grid-Connected Inverter 171 8.1 Introduction 171 8.2 Proposed Controller and System Modeling 172 8.3 System Analysis and Controller Design 175 8.4 Simulation Results 178 8.5 Experimental Results 179 8.6 Conclusions 182 References 182 9 Line Interactive UPS 185 9.1 Introduction 185 9.2 System Overview 188 9.3 Core Controller 192 9.3.1 Virtual Impedance and Grid Harmonics Rejection 193 9.4 Power Flow Controller 195 9.4.1 Drooping Control Equations 195 9.4.2 Small Signal Analysis 196 9.4.3 Stability Analysis and Drooping Coefficients Selection 200 9.5 DC Link Voltage Controller 206 9.6 Experimental Results 209 9.7 Conclusions 217 References 218 10 Microgrid Protection 221 10.1 Introduction 221 10.2 Key Protection Challenges 221 10.2.1 Fault Current Level Modification 221 10.2.2 Device Discrimination 223 10.2.3 Reduction in Reach of Impedance Relays 223 10.2.4 Bidirectionality and Voltage Profile Change 224 10.2.5 Sympathetic Tripping 224 10.2.6 Islanding 224 10.2.7 Effect on Feeder Reclosure 224 10.3 Possible Solutions to Key Protection Challenges 225 10.3.1 Possible Solutions to Key Protection Challenges for an Islanded Microgrid Having IIDG Units 225 10.4 Case Study 229 10.4.1 Fault Level Modification 231 10.4.2 Blinding of Protection 232 10.4.3 Sympathetic Tripping 233 10.4.4 Reduction in Reach of Distance Relay 233 10.4.5 Discussion 234 10.5 Conclusions 235 References 236 11 An Adaptive Relaying Scheme for Fuse Saving 239 11.1 Introduction 239 11.1.1 Preventive Solutions Proposed in the Literature 240 11.1.2 Remedial Solutions Proposed in the Literature 241 11.1.3 Contributions of the Chapter 242 11.2 Case Study 242 11.3 Simulation Results and Discussion 245 11.4 Fuse Saving Strategy 247 11.4.1 Options and Considerations for the Selection of Ipickup of the 50 Element 249 11.4.2 Adaptive Algorithm 251 11.5 How Reclosing Will Be Applied 252 11.6 Observations 255 11.7 Conclusions 257 References 257 Appendix A SVM for the NPC Converter MATLAB(R)-Simulink Models 261 A.1 Calculation of Duty Cycles for Nearest Space Vectors 261 A.2 Symmetric Modulation Strategy 262 A.3 MATLAB(R)-Simulink Models 263 References 279 Appendix B DC-Link Capacitor Current Numerical Calculation 281 Index 285

Product Details

  • ISBN13: 9780470824030
  • Format: Hardback
  • Number Of Pages: 352
  • ID: 9780470824030
  • weight: 638
  • ISBN10: 0470824034

Delivery Information

  • Saver Delivery: Yes
  • 1st Class Delivery: Yes
  • Courier Delivery: Yes
  • Store Delivery: Yes

Prices are for internet purchases only. Prices and availability in WHSmith Stores may vary significantly

Close