Rock Mechanics for Resources, Energy and Environment

Rock Mechanics for Resources, Energy and Environment

By: Dariusz Lydzba (editor), Marek A. Kwasniewski (editor)Mixed Media

More than 4 weeks availability

Description

This book contains the Proceedings of EUROCK 2013 - The 2013 ISRM International Symposium, which was held on 23-26 September 2013 in Wroclaw, Poland. The Symposium was organized by the ISRM National Group POLAND and the Institute of Geotechnics and Hydrotechnics of the Wroclaw Institute of Technology. The focus of the Symposium was on recent developments in the field of rock mechanics with an emphasis on the application of rock mechanics to the extraction of natural resources, securing energy supplies and protecting of the environment surrounding rock that is subjected to engineering activities. The main topics, which were covered in the 150 papers (including six keynote papers) that make up this book are: rock mass characterization, laboratory and in-situ testing, constitutive models and numerical modeling, mathematical modeling of THM processes in rocks, mine design and ground control, underground storage and waste disposal, slope and open pit stability, dynamic phenomena in rock masses, design methodology in rock engineering, mechanical breakage of rocks, rock tunnel excavation and support, petroleum rock mechanics and geological CO2 sequestration. The book also includes the 2013 ISRM Franklin Lecture by A. Goricki on the engineering aspects of geotechnical tunnel design. The book will be of interest and value to rock mechanics researchers as well as to professionals who are involved in the various branches of rock engineering.

Create a review

Contents

The 2013 ISRM Franklin lecture Engineering aspects of geotechnical tunnel design A. Goricki Keynote lectures The mechanical behavior of salt and salt caverns P. Berest The mechanisms and consequences of strong mining tremors that occur in Polish hard coal and copper mines J. Dubinski Geomechanical aspects of shale gas development M.B. Dusseault An overview of underground rock engineering risk J.A. Hudson Optimization, sensitivity and robustness analysis - Applications and trends in geomechanics H. Konietzky & R. Schlegel Geomechanical modeling of CO2 storage in deep saline aquifers - A review X. Li, W. Yuan, B. Bai, M. Liu & H. He 1. Rock mass characterization A preliminary geoengineering assessment of Bazda antique underground quarries in, Sanliurfa, Turkey C. Agan, M.I. Yesilnacar, M. Genis, S. Kulaksiz, R. Ulusay, O. Aydan & M.D. Yucel The geological and geotechnical susceptibility of Jurassic and Cretaceous units; A case study from Central-Western Portugal P.S. Andrade, H. Ventura & P.M. Callapez Characterisation and propagation of epistemic uncertainty in rock engineering: A slope stability example A. Bedi & J.P. Harrison Characterization of the "Chaotic Complex" (Northern Apennines, Italy) M. Coli & M. Tanzini Impact of expertise on rock fall assessment - An original study A. Delonca, T. Verdel & Y. Gunzburger Seismic reflections around a tunnel "viewed" through waveguides - A case study J.M. Descour & H. Hume Comparison between different estimators of the degree of rock mass fracturing A.M. Ferrero, M.R. Migliazza & G. Umili Passive three-dimensional microseismic imaging for mining-induced rock-mass degradation J.-W. Huang, J.M. Reyes-Montes & R.P. Young ERMR system and correlations with known rock mass rating systems M. Jovanovski & I. Peshevski Assessing the mechanical properties of a rock using indentation tests H.-T. Le, F. Descamps, J.-P. Tshibangu, J.-F. Nauroy, O. Vincke & L. Cangemi Rock mechanical aspects for cavern stability T. Pilgerstorfer, H.Wannenmacher, K. Grossauer, A. Stucki & B. Schwegler Study of the relation between cracks and the elastic properties of rock mass I. Stan-Kleczek & A.F. Idziak Rock physical interpretation of the seismic properties of the excavation disturbed zone T. Takahashi & S. Tanaka Depth distribution of lithospheric strength determined by the self-unbalancing shear rupture mechanism B.G. Tarasov Geomechanical attributes of reconstituted Indian coals under carbon dioxide saturation V. Vishal, P.G. Ranjith & T.N. Singh Adjustment of rock mass strength parameters using direct shear tests carried out on large blocks G.J. Zapata & A.P. Assis Determination of the extent of fractured zones around mine openings using the resistivity and GPR methods B. Zogala, M.J. Mendecki, W.M. Zuberek, T. Golebiowski & W. Antonik 2. Laboratory and in-situ testing On the accuracy of the in-situ Schmidt hammer test on carbonate rocks H. Arman, W. Hashem, O. Abdelghany & A. Aldahan Rockfall: Scaling factors for the Coefficient of Restitution P. Asteriou, H. Saroglou & G. Tsiambaos Nano-indentation tests on partially satured argillite: Experimental device and measurements C. Auvray, R. Giot & D. Grgic Measuring stress induced electric field in sandstone and granite using the Electric Potential Sensor A. Aydin, M.R. Dobbs, H.J. Reeves, C.C. Graham & M.P. Kirkham Characterization of the distribution of physical and mechanical properties of rocks at the Tutupan coal mine, South Kalimantan, Indonesia M.A. Azizi, S. Kramadibrata, R.K.Wattimena & I.D. Sidi Experimental study of the permeability evolution of a rock fracture under THMC conditions A. Blaisonneau, M. Peter-Borie & S. Gentier Simulation of single cutter experiments in evaporite using the discrete element method C. Carrapatoso, S.A.B. da Fontoura, I.M.R. Martinez, N. Inoue, A. Lourenco & D. Curry Damage and plasticity rate dependence of Luna limestone in uniaxial compression J. Cieslik Effective stresses in cohesive discontinuous rocks around a vertical drill hole P. Ciobanu A database to manage rock mechanical properties and assess formation abrasiveness for drilling F. Descamps, J.-P. Tshibangu, N. da Silva & S. Regnard Effect of an increase in rotation in a wear test to predict the durability of rock materials J.L.E. Dias Filho, G.C. Xavier & P.C.A. Maia The elastic wave velocity in rocks under triaxial stress at high pressure and temperature A. Dziedzic & J. Pininska Environmental characterization of the stress-corrosion cracking of rockbolts in underground coal mines using laboratory and in-situ testing E. Elias, D. Vandermaat, A. Crosky, S. Saydam, P. Hagan, B.K. Hebblewhite & P. Craig Effect of constant and varying mean stress levels of cyclic loading on the indirect tensile strength of rocks N. Erarslan Tensile fracturing of anisotropic Brisbane phyllite N. Erarslan, D.J.Williams & A. Shokouhi A new test for the characterization of highly jointed rock masses C. Gonzalez-Nicieza, M.B. Prendes-Gero, R. Fernandez-Rodriguez & F. Lopez-Gayarre Influence of chemo-mineralogical transformations on micro/macro-mechanical properties of ironstone D. Grgic Influence of water vapor pressure in surrounding environment on strength and fracture toughness of rocks M. Kataoka, Y. Obara & H.S. Jeong Susceptibility of rock materials used in the construction of monuments to long-term salt crystallization A.K. Klopotowska & P.J. Lukaszewski Beachrock mapping by geophysical exploration: Application toYagaji Island in Okinawa, Japan R. Kubo, S. Kawasaki, K. Suzuki, S. Yamaguchi & T. Hata Physical and mechanical characterization of weak schistose rocks T. Le Cor, D. Rangeard, V. Merrien-Soukatchoff & J. Simon Thermal conductivity of rocks under high pressure conditions W. Lin, O. Tadai, T. Hirose,W. Tanikawa, M. Kinoshita, H. Mukoyoshi & M. Takahashi Developing a high capacity direct shear apparatus for the large scale laboratory testing of rock joints Z. Moradian, C. Gravel, A. Fathi, G. Ballivy, P. Rivard & M. Quirion Some remarks on the experimental determination of the Biot coefficients A. Nowakowski & J.Walaszczyk Dynamic and static rock mechanical properties of heavy oil sandstones C. Rabe, P. Perdomo & J. Cherrez Selection and interpretation of shear strength parameters for weak phyllites G.V. Ramana, Shashank Pathak & Nripendra Kumar Evaluation of specific cutting energy in the circular sawing with the elastic parameters of rocks N. Sengun, I. Ugur, S. Demirdag & R. Altindag Strength behaviour of reinforced natural jointed rock L.P. Srivastava & M. Singh Estimation of the effects of the centrifugal hydraulic conductivity of impermeable rocks under constant head conditions M. Takahashi,W. Lin & M. Kato An in-situ monitoring system for natural temperature and relative humidity A.J. Taylor, J.C. Cripps & S.D. Clarke Micro-textural controlled variations of the geomechanical properties of andesites O. Undul, F. Amann, N. Aysal & M. Plotze Loss slake index evaluation and its applicability to marl G. Vlastelica, P. Miscevic & D. Salvezani Effect of scratch length on the Cerchar abrasivity index O. Yarali, H. Aydin, H. Duru &A. Ozarslan 3. Constitutive models and numerical modeling Strain-softening characterization of granitic rocks and numerical simulation of servo-controlled strength tests J. Arzua, J. Barbiero & L.R. Alejano A constitutive model for jointed rock mass A. Azami, T. Yacoub, J. Curran & D.Wai Numerical investigation of asperity degradation in the direct shear test of rock joints M. Bahaaddini, P. Hagan, R. Mitra & B.K. Hebblewhite Micromechanics of geocomposites: CT images and FEM simulations R. Blaheta, R. Kohut, A. Kolcun, K. Soucek & L. Stas The coupled hydro-mechanical approach for fluid compressibility problems in porous media S.R.C. Brant, M.P. Cordao Neto & I. Fernandes Gomes Rheological behavior of jointed rock masses inferred from an analogue laboratory testing approach M.E. Discenza, S. Martino, G. Scarascia Mugnozza, L. Stedile, A. Bretschneider & M. Teodori Numerical simulation of the impact of a rock fall impact on a flexible barrier using Abaqus/Explicit 6.12 J.P. Escallon, C.Wendeler & M. Mrozik Global methodology for the evaluation of the stress field in a rock mass from in-situ tests. Application to the Salamonde II powerhouse cavern M. Espada, L. Lamas, N. Leitao & B. Figueiredo Influence of rock mass creep on tunnel loading P. Fortsakis, A. Kalos, V. Despotaki & M.J. Kavvadas A new time-dependent constitutive model and its application in underground construction M. Karami & A. Fahimifar Efficient and numerically stable anisotropic failure criterion for micro layered rock M. Kawa & D. Lydzba An extended Lemaitre's viscoplastic model X. Lei & F.L. Pellet Modeling fault activation due to the evolution of remote stresses M.T. Myers, V.A. Dunayevsky & M.B. Bennett A case study of large scale rock mass preconditioning by confined blasting I. Onederra, A. Catalan & G. Chitombo Back analysis of rock mass behavior of the Quintner Limestone at the Gonzen mine near Sargans, Switzerland M.A. Perras, E. Ghazvinian, M.S. Diederichs, F. Amann & H.Wannenmacher Numerical simulation of the water jet excavation of soft rock saturated with water K. Sakaguchi, Y. Yumoto & A. Kizaki Elastic response of laterally loaded rock sockets using 3D finite element analyses K.P. Tzivakos, M.J. Kavvadas & D.G. Kaltsas The influence of the type of pore fluid in two-phase media on the form of consolidation equations A. Uciechowska &T. Strzelecki AWeibull distribution-based constitutive model of creep of salt rock H.W. Zhou, J.Y. Ding, J.D. Liu & J.F. Liu 4. Mathematical modeling of coupled T-H-M processes in rocks Definition and implementation of a fully coupled THM model for unsaturated rocks A. Haxaire, V. Galavi & R.B.J. Brinkgreve A study on shear characteristics of a smooth rock surface under different thermal, hydro and mechanical conditions T. Kim, N. Zhang & S. Jeon Periodic character of failure near openings in high-stress rock mass conditions V.V. Makarov, L.S. Ksendzenko, N.A. Opanasyuk & A.M. Golosov Three-dimensional modeling of a coupled shear-flow test on soft sedimentary rock H. Park, K. Ito, M. Takahashi, M. Osada & G. Smolnik Study of thermo-hydro-mechanical processes at the potential site of an Indian nuclear waste repository A.K. Verma, T.N. Singh & R.K. Bajpai Numerical modeling of induced seismicity associated with fluid injection and withdrawal using 2D discrete element fracture network model J.S. Yoon, A. Zang, G. Zimmermann & O. Stephansson 5. Mine design and ground control Strength of faults - A concern for mining engineers? M. Alber Critical energy and mine rockburst potential M. Al Heib, G. Lafont, C. Didier, Y. Gunzburger, J.P. Piguet,W. Pytel & H. Mitri The design and results of an innovative instrumentation method for monitoring and improving the excavation of a road tunnel in a highly fractured and strained rock mass M.I. Alvarez-Fernandez, M.B. Prendes-Gero, I.N. Alvarez-Garcia &A.O. Oliva-Gonzalez The shape effect and rock mass structural control for mine pillar design L.A. Ayres da Silva, A.L.M. Ayres da Silva & E.C. Sansone The residual risk of an abandoned mine D. Brambilla, L. Longoni, M. Papini, D. Arosio & L. Zanzi Analysis of the consequences of mining exploitation in substantially disturbed strata based on spatial measurements of a building's tilt L. Florkowska &A. Kanciruk Geomechanical and geotechnical evaluation of maingate No. 080 5253 monitoring in the conditions of the Paskov mine R. Kukutsch, K. Soucek, P. Konicek, J. Ptacek, P.Waclawik & R. Snuparek Stability analysis of deep coal mine main roadways for pumped hydropower lower reservoir storage A. Ozarslan, H.Y. Aydiner, E. Koken & M. Alber Overburden deformation and damage caused by the construction of a hard rock tunnel - An analysis and countermeasures G. Yu, S. Lu, D. Meng & G. Ouyang 6. Underground storage and waste disposal Modeling the Excavation Damaged Zones in the Bataapati radioactive waste repository F. Deak, L. Kovacs & B. Vasarhelyi Quantitative roughness profiling of fracture surfaces of a granitic host rock at a radioactive waste disposal site A. Krupa, F. Deak, P. Gorog, I. Buocz & A. Torok Rock mechanics for gas storage caverns with respect to optimization of operation B. Leuger, K. Staudtmeister & D. Zapf Feasibility and behavior of a full scale disposal cell in a deep clay layer J. Morel, F. Bumbieler, N. Conil & G. Armand Temporal analysis of fracturing using acoustic emissions at the Aspo Pillar Stability Experiment H.C. Moretti, J.M. Reyes-Montes, J.R. Haycox & R.P. Young 7. Slope and open pit stability Conditions of stability in a marl and limestone opencast mine Z. Bednarczyk An on-line landslide monitoring system in flysch Carpathians Z. Bednarczyk Swelling rocks in an open pit mine M.E. Bilir & E. Aydingun The role of shear surface geometry in the definition of deep-seated gravitational slope deformation thresholds D. Brambilla, L. Longoni, M. Papini, D. Arosio & L. Zanzi Large scale field tests for slope stabilizations made with flexible facings M. Cala, M. Stolz, P. Baraniak, A. Rist &A. Roduner Application of stochastic methods for the strain and stability analysis of a slope E. Hrubesova, B. Lunackova &T. Petrik Physical modeling and simulation of slope failure by means of centrifuge acceleration S. Kramadibrata, R.K.Wattimena, M.A. Azizi, Y.Wicaksana & I.D. Sidi A safety inspection system for large-scale slopes in Korea J.G. Lee, B.S. Jang, S.W. Bae, J.S. Moon, H.J. Sin & J.H. Park Basic kinematic analysis of a rock slope using terrestrial 3D laser scanning on the M-22 highroad pilot site M. Marjanovic, B. Abolmasov, U. Djuric, S. Zecevic & V. Susic Microseismicity due to gravity-induced rock-mass deformations and a related alarm system S. Martino, A. Prestininzi, S. Rivellino, L. Lenti & A. Paciello Comparison between the mechanical behavior of barriers against rock fall vs debris flows A. Segalini, R. Brighenti, A.M. Ferrero & G. Umili Rock fall modeling for protection barrier design and validation in the Sungun copper mine R. Tajaddodian Far, N. Behi & F. Alilou Slope optimization and design based on geotechnical and hydrogeological assessments for a new deep open pit coal mine R. Ulusay, M. Ekmekci, E. Tuncay & N. Hasancebi Influence of accuracy in specifying design input data on stability safety factors for excavated slopes in an open pit mine V.K. Vavilova Monitoring unstable slopes using Persistent Scatterers Interferometry: opportunities and challenges J.Wasowski, F. Bovenga, D. Nitti & R. Nutricato 8. Dynamic phenomena in rock masses Large scale field tests of rock bolts and high-tensile steel wire mesh subjected to dynamic loading M. Cala, A. Roth & A. Roduner Unifying energetic approach for the control of ground vibrations C. Dinis da Gama A numerical study on the ground amplifications in areas above abandoned room and pillar mines and old longwall mines M. Genis & O. Aydan Spatio-temporal analysis of the influence of mining on the surface - A case study from the Ostrava-Karvina Coal Field E. Jirankova & P.Waclawik Control of rockburst risk in hard coal longwall mining - A case study P. Konicek, R. Kukutsch, J. Ptacek, K. Soucek, L. Stas & P.Waclawik Integration of geomechanical and geophysical analysis methods for the prediction of seismic events in underground mining B. Orlecka-Sikora & W. Pytel Determination of dynamic rock strength to assess blasting efficiency F.L. Pellet, V.K. Dang, C. Baumont, M. Dusseux & G.J. Huang Dynamic modelling of a mining-induced fault slip A. Sainoki & H. Mitri The estimation of the effectiveness of torpedo blasting based on an analysis of focal mechanisms of induced mining tremors in the Bielszowice coal mine L. Wojtecki, M.J. Mendecki, A. Talaga & W.M. Zuberek 9. Design methodology in rock engineering Rock engineering design and the evolution of Eurocode 7 L.R. Alejano, A. Bedi, A. Bond, A.M. Ferrero, J.P. Harrison, L. Lamas, M.R. Migliazza, R. Olsson, A. Perucho, A. Sofianos, H. Stille & D. Virely Risk management approach for the design of underground constructions B. Amusin & J. Eisenberg A new design approach for rockfall barriers A. Grimod & G. Giacchetti Influence of in-situ stress variation on results of back analyses - an open pit case study M. Grosic, D. Vidovic & Z. Arbanas The contribution of rock mechanics to small-scale mining in Indonesia P.N. Hartami, B. Nugroho, S. Mayangsari & Nurhardono Index of time-dependency for rock and its application for the assessment of the long-term stability of underground structures K. Hashiba & K. Fukui Rock ledge support design. A deterministic and stochastic approach J. Jakubowski & J.B. Stypulkowski Protection of a tunnel entrance from rockfall risk C. Mignelli, K. Daneshmand & D. Peila Infrared thermography methodology applied to detect localized rockfalls in self-supporting underground mines M.B. Prendes-Gero, F.J. Suarez-Dominguez, C. Gonzalez-Nicieza & M.I. Alvarez-Fernandez Are classification systems outdated? W. Schubert Sensitivity analysis of the generalized Hoek-Brown failure criterion P. Van & B. Vasarhelyi Analysis and treatment of a diversion tunnel in adverse geological conditions: A case study from south-western China J.K. Yang, Y.F.Wang & D.F. Chen Excavation and monitoring of the main tailrace tunnels of the Xiangjiaba underground power station Z. Yi Periphery mapping in NATM tunnels B. Yilmaz & H. Keskin Citiroglu 10. Mechanical breakage of rocks Investigations on the fracture behaviour of rocks in a triaxial compression test L. Baumgarten & H. Konietzky The relationships between Drilling Rate Index (DRI), physico-mechanical properties and specific cutting energy for some carbonate rocks G. Ekincioglu, R. Altindag, N. Sengun, S. Demirdag & A. Guney A new small scale rock cutting test M. Entacher, S. Lorenz, R. Galler & G.Winter Emission analysis of the cutting tools used for hard rock cutting with regard to status monitoring K. Nienhaus, C. Kuchinke & D. Rollinger 3D elastic solutions for point load and Brazilian indirect tensile strength tests M. Serati, H. Alehossein, N. Erarslan & D.J.Williams 11. Rock tunnel excavation and support Underground construction at high altitudes: A case history on Mont Blanc in Italy G. Bragonzi, P. Cancelli, R. Castellanza & G. Frigerio Evaluation of geological conditions ahead of a tunnel face using the Tunnel Seismic Prediction method (TSP) - Lesson learned from the Pahang-Selangor raw water transfer tunnel, Malaysia M.A.M. Ismail, R. Azit, S.M. Ng, H. Zabidi, N. Bakhudin & Z. Nordin Tunnel behaviour and support in molassic rocks. Experience from 12 tunnels in Greece V. Marinos, G. Prountzopoulos & P. Fortsakis New yielding elements for tunnel linings: Design requirements, layout and influence on system behavior W. Schubert & N. Radoncic A Rock Mass Rating system for predicting TBM utilization 921 S. Yagiz, T. Kim, O. Frough & S.R. Torabi 12. Petroleum rock mechanics Observations of the intrinsic acoustic anisotropy of sands in various geologic settings L.A. Hathon & M.T. Myers Well stimulation on the basis of preliminary triaxial tests of reservoir rock V.I. Karev & Yu.F. Kovalenko Evaluation of stress changes due to multi-stage hydraulic fracturing - Consideration of field results N.B. Nagel, F. Zhang, M.A. Sanchez-Nagel & B. Lee Analysis of the hydromechanical behavior of fault zones in petroleum reservoirs G.L. Righetto, C.E.R. Lautenschlager, N. Inoue & S.A.B. da Fontoura 13. Geological CO2 sequestration AE monitoring of hydraulic fracturing experiments conducted using CO2 and water T. Ishida, Y. Nagaya, S. Inui, K. Aoyagi, Y. Nara, Y. Chen, Q. Chen & Y. Nakayama Effects of vertical stress on fracture propagation using super critical carbon dioxide A. Kizaki, K. Ohashi, H. Tanaka & K. Sakaguchi Assessing the geomechanical effects of CO2 injection in a depleted gas field in Poland by field scale modelling B. Orlic, M. Mazurowski, B. Papiernik & S. Nagy Subject index Author index

Product Details

  • publication date: 11/09/2013
  • ISBN13: 9781138000803
  • Format: Mixed Media
  • Number Of Pages: 1000
  • ID: 9781138000803
  • weight: 1905
  • ISBN10: 1138000809

Delivery Information

  • Saver Delivery: Yes
  • 1st Class Delivery: Yes
  • Courier Delivery: Yes
  • Store Delivery: Yes

Prices are for internet purchases only. Prices and availability in WHSmith Stores may vary significantly

Close